I have flashed before btw on these two n900's but for some reason its not anymore. Im using the very latest macbook pro. I am not using the mac gui because it requires rosetta to run and don't want it installed. Will try the windows tool now. On 23/08/2011, at 2:41 AM, Graham Cobb wrote: > On Monday 22 August 2011 16:04:59 Dan Rossi wrote: >> sudo flasher -F ARM.bin -f -R >> flasher 3.11.5 (May 17 2011) Harmattan >> >> USB device found at bus 253, device address 4. >> Device serial number is >> Sending request 0x01 failed: Operation timed out >> NOLO_REQ_GET_STATUS: Operation timed out >> ERROR: Device status query failed > > The USB connectivity can be pretty unreliable. Some suggestions: > > Unplug all other USB stuff, and plug the N900 cable directly into the PC, > without a hub in the way. > > If you are using windows (I know you aren't from your command line, but...), > reboot (without the N900 connected), and try the process again. > > If you can, try a different PC -- the reliability is very different on my > different PCs. > > If you can, try a different OS (windows vs. linux). > > Try slight differences in the process (which order you plug things in, when you > start flasher, etc). > > Persevere -- in my experience you will get it to work eventually. > > Graham > _______________________________________________ > maemo-users mailing list > maemo-users@xxxxxxxxx > https://lists.maemo.org/mailman/listinfo/maemo-users _______________________________________________ maemo-users mailing list maemo-users@xxxxxxxxx https://lists.maemo.org/mailman/listinfo/maemo-users
