Rainer Dorsch wrote: > Hello, > > I used the nice wiki page http://wiki.maemo.org/Booting_from_a_flash_card to > make my N800 boot from my internal flash card (internal mmc). > > Nokia-N800-23-14:~# df > Filesystem 1k-blocks Used Available Use% Mounted on > /dev/mmcblk0p2 4096 2404 1692 59% /mnt/initfs > none 512 88 424 17% /mnt/initfs/tmp > /dev/mmcblk0p2 12019360 424824 10983976 4% / > none 512 88 424 17% /tmp > none 1024 56 968 5% /dev > tmpfs 1024 0 1024 0% /dev/shm > /dev/mmcblk0p1 3902704 1203160 2699544 31% /media/mmc2 > Nokia-N800-23-14:~# > > What does not work though is to make the internal flash card (internal mmc) > the default boot device with > > chroot /mnt/initfs cal-tool --set-root-device ask:immc2 > > The N800 always wants to boot from internal flash (flash) instead. > > Any hint what I am doing wrong is welcome... > > Thanks, > Rainer > _______________________________________________ I had the same problem. I wanted to redo the the partition sizes anyway so I went through the steps again. The differences I did were on how I answered the final questions on boot methods. >From memory, so I cannot remember the exact phrasing, I answered that it should clean up anything left over for Nokia techs, or something like that I also said no to such things as usb and and telnet recovery methods. Basically I kept things simple and after the rebuild it worked as it should. The only things I question in the process is the size of the vfat partition. What is it actually need for to assign 480MB? So far I have not used it for anything. The most I have done with it is to extend virtual memory to that partition, which unfortunately only allows to 125MB. _______________________________________________ maemo-users mailing list maemo-users@xxxxxxxxx https://lists.maemo.org/mailman/listinfo/maemo-users
