On Wed, 2008-08-20 at 04:43 +0000, Lionel D. Hummel wrote: > Flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin on my N800 does not work for me, while flashing OS 2007 releases and RX-34_2008SE.2.2007... work fine. > > Is that RX-34_DIABLO image known to have problems? > If so, I'm surprised it is still up on Nokia's web site, especially without any caveats. I found one mention of this problem in the #maemo IRC channel log on 7/31/2008, but I haven't seen any other discussion of the problem (at least not with enough detail to recognize it ;-). > > I'm flashing using an Ubuntu 7.10 host. The output text showing the problem is: > > lionel@ubuntu:~/Projects/n800$ sudo ~/bin/flasher-3.0 --fiasco RX-34_DIABLO_4.20 > 08.23-14_PR_COMBINED_MR0_ARM.bin -f > flasher v0.8.7 (Oct 17 2006) > [ ... ] > Suitable USB device not found, waiting > USB device found found at bus 001, device address 021 > Found device RX-34, hardware revision 1301 > NOLO version 1.1.6 > [ ... ] > Sending kernel image (1500 kB)... > 100% (1500 of 1500 kB, avg. 8024 kB/s) > Flashing kernel... done. > Sending initfs image (2233 kB)... > > Write failed after 0 bytes > usb_bulk_write: Resource temporarily unavailable > lionel@ubuntu:~/Projects/n800$ > I had the same problem. Disconnect the tablet, pull the battery to turn it off and try again. Works okay. My tablet was stuck in a reboot loop after the first try. Getting the software loaded is another story. I'm finding some of the software for Diablo won't load. Notably Leafpad and Maemopad+. Best Regards, -- Peter Bart <peter@xxxxxxxxxxxxxxxxxxx> http://petertheplumber.net _______________________________________________ maemo-users mailing list maemo-users@xxxxxxxxx https://lists.maemo.org/mailman/listinfo/maemo-users
