Hi, this is a good example of a recipe that would make http://maemo.org/community/wiki/ bigger, better and more useful to the maemo newcomers. On Mon, 2007-08-20 at 14:13 +0200, ext Fabian K?ster wrote: > Am Sonntag, 19. August 2007 16:56 schrieb Jonathan Hudson: > > On Planet Maemo today there was an article by Daniel Gentleman > > (aka thoughtfix) about the lack of camera functionality on the N800, > > together with a link > > <http://web.media.mit.edu/%7Elifton/snippets/n800_to_sl/> to streaming > > video off the N800, which, alas, didn't quite work for me. > > > > But with a little experientation: > > > > 0) Install all the gstreamer stuff as per link; > > > > 1) On the platform (172.31.0.245), to a Linux box (172.31.0.244), the > > following (slightly modified from n800_to_sl link), > > as ~/bin/rtpstream.sh > > > > #!/bin/sh > > > > VPORT=5434 > > APORT=5432 > > HOST=${1:-172.31.0.244} > > > > gst-launch-0.10 v4l2src ! \ > > video/x-raw-yuv,width=176,height=144,framerate=\(fraction\)15/1 ! \ > > hantro4200enc stream-type=1 profile-and-level=1001 ! \ > > video/x-h263,framerate=\(fraction\)15/1 ! rtph263ppay mtu=1438 ! \ > > udpsink host=$HOST port=$VPORT dsppcmsrc ! queue ! \ > > audio/x-raw-int,channels=1,rate=8000 ! mulawenc ! rtppcmupay mtu=1438 ! \ > > udpsink host=$HOST port=$APORT > > > > 2) On the Linux box, the .sdp file from the n800_to_sl link, with host > > address, i.e. /tmp/n800.sdp > > > > v=0 > > o=- 37 614155991 IN IP4 127.0.0.0 > > s=QuickTime > > t=0 0 > > a=range:npt=now- > > m=audio 5432 RTP/AVP 0 > > c=IN IP4 172.31.0.245 > > b=AS:63 > > m=video 5434 RTP/AVP 96 > > c=IN IP4 172.31.0.245 > > a=rtpmap:96 H263-2000/90000 > > a=fmtp:96 > > a=cliprect:0,0,144,176 > > a=framesize:96 176-144 > > > > 3) On the N800, pop out the camara and run: > > > > $ ~/bin/rtpstream.sh # assume on PATH, +x etc. > > > > 4) On Linux box: > > > > $ vlc /tmp/n800.sdp > > > > 5) Watch in amazement. > > > > Can't wait for SIP compatible video from Rtcomm ... please. > > > > -jh > > _______________________________________________ > > maemo-users mailing list > > maemo-users at maemo.org > > https://lists.maemo.org/mailman/listinfo/maemo-users > > The instructions from > <http://web.media.mit.edu/%7Elifton/snippets/n800_to_sl/> did not work for me > either but yours work - Thanks! > > Fabian > > _______________________________________________ > maemo-users mailing list > maemo-users at maemo.org > https://lists.maemo.org/mailman/listinfo/maemo-users -- Quim Gil - http://maemo.org
