It seems to be a little bit better with the SDHC kernel. the mmc card is not mounted, but with the dmesg command, I see : [ 2.627746] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 [ 2.630004] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0 [ 2.632415] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 [ 2.634521] mmci-omap mmci-omap.1: command timeout (CMD8) the log returned by dmesg is too short, I think there is other messages before. David. Neil MacLeod wrote: > David Hautbois wrote: > >> Hi >> I own 16Mo 32Mo MMC cards (Don't laugh please :-P ) >> >> The N800 don't detect it. >> >> Is there a method to understand if : >> - it is a hardware incompatibility >> - modules are missing >> - the N800 detect it but can't use it >> >> >> Thanks. >> >> David. >> > Try using the SDHC kernel[1] then insert your MMC cards and check dmesg for output (explained here[2]) which may identify the problem. > > 1. http://intr.overt.org/blog/?p=50 > 2. http://intr.overt.org/blog/?p=49 > > _______________________________________________ > maemo-users mailing list > maemo-users at maemo.org > https://maemo.org/mailman/listinfo/maemo-users > >
