Josh Harrison wrote: > Ok all, I bought and stuck a 4GB SD card into my N800 - and it works. > The N800 cannot handle formatting the 4GB SD, it formats as a 2GB card. > I stuck it into my reader on my computer and formatted it to it's full > potential, and reinserted the card back into the N800, and sure enough, > the memory manager shows 3.93GB free on my card. > Hope this can serve as useful information for those out there in the tubes. > Josh > I assume you formatted the card using the File Manager, in which case the N800 will format the card using FAT16 - 2GB is the maximum volume/partition supported by the FAT16 filesystem. The N800 also understands FAT32 and this is what your PC used to format the 4GB card so when you re-inserted it back into the N800 the full card capacity could be accessed by the N800. Basically, the N800 needs to use FAT32 when formatting > 2GB partitions, and FAT16 <= 2GB. Until this issue is resolved you will have to continue formatting your card in your PC to get the maximum capacity, or use mkdosfs in xterm.
