On 1/31/07, Michael Wiktowy <michael.wiktowy at gmail.com> wrote: > On 1/31/07, Jon Smirl <jonsmirl at gmail.com> wrote: > > No power is also tied up in implementing the kernel USB OTG driver for > > the device. The spec says you can't advertise OTG support if the port > > has no power. > > Neither the 770 or the N800 advertises USB OTG support. A Nokia dev > mentioned a few days ago that the N800 definitely does *not* support Load the USB gadget driver and it will advertise OTG support. Works on the 770. I don't have an 800 yet. > USB OTG. There were also a few threads (not sure if it was here or > ITT) mentioning that the kernel included in the N800 firmware does not > include the bits necessary to enable USB host mode so there is some > doubts that the N800 hardware even supports USB host. Some folks are > recompiling the kernel to add those bits back in but I don't think > anyone has successfully had the N800 working as a USB host as of yet. > > /Mike > _______________________________________________ > maemo-users mailing list > maemo-users at maemo.org > https://maemo.org/mailman/listinfo/maemo-users > -- Jon Smirl jonsmirl at gmail.com
