ext Richard Griffiths wrote: > I've purchased the cp-h420mp hub and special y cable for USB host mode (links > below), but I must be doing something wrong. Running 2006 OS I flashed the > --enable-usb-host-mode which reported: The device is now in USB host mode > > I've charged up the hub's batteries, but connecting the hub using the y-cable > isn't showing up. I've tried connecting a usb flash drive to the hub as well as > a usb keyboard, but nothing shows. > > I confirmed the hub and cable work on a PMA400, but that device does provide > power to the USB port. When connected to the 770, no leds light on the hub. > > Any idea what I'm doing wrong? > You should provide +5V power from hub to 770 to get it detecting usb device connected. Personally i did it so that i just soldered small wire inside of hub over diaode that has purpose to prevent hub suplying power back to host. In this case suplying power to host was intentional. Kate > Hub: > http://logicalplus.stores.yahoo.net/cycpbapo4poh.html > cable; > http://www.xpcgear.com/usbtype2atob.html > > > > File Type: jpg USB_mini_5pin_B_y_cable.jpg (25.8 KB, 27 views) > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > maemo-users mailing list > maemo-users at maemo.org > https://maemo.org/mailman/listinfo/maemo-users >
