Re: [PATCH v2 1/3] selftests: netfilter: add ipvs test script

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 01, 2019 at 11:50:33AM +0200, Simon Horman wrote:
> On Fri, Sep 27, 2019 at 02:21:04PM +0800, Haishuang Yan wrote:
> > Test virutal server via directing routing for IPv4.
> >
> > Tested:
> >
> > # selftests: netfilter: ipvs.sh
> > # Testing DR mode...
> > # ipvs.sh: PASS
> > ok 6 selftests: netfilter: ipvs.sh
> >
> > Signed-off-by: Haishuang Yan <yanhaishuang@xxxxxxxxxxxxxxxxxxxx>
> > ---
> > v2: optimize test script
> > ---
> >  tools/testing/selftests/netfilter/Makefile |   2 +-
> >  tools/testing/selftests/netfilter/ipvs.sh  | 184 +++++++++++++++++++++++++++++
> >  2 files changed, 185 insertions(+), 1 deletion(-)
> >  create mode 100755 tools/testing/selftests/netfilter/ipvs.sh
> >
> > diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
> > index 4144984..de1032b 100644
> > --- a/tools/testing/selftests/netfilter/Makefile
> > +++ b/tools/testing/selftests/netfilter/Makefile
> > @@ -2,6 +2,6 @@
> >  # Makefile for netfilter selftests
> >
> >  TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
> > -	conntrack_icmp_related.sh nft_flowtable.sh
> > +	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
> >
> >  include ../lib.mk
> > diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
> > new file mode 100755
> > index 0000000..658c06b
> > --- /dev/null
> > +++ b/tools/testing/selftests/netfilter/ipvs.sh
> > @@ -0,0 +1,184 @@
> > +#!/bin/sh
> > +# SPDX-License-Identifier: GPL-2.0
> > +#
> > +# End-to-end ipvs test suite
> > +# Topology:
> > +#--------------------------------------------------------------+
> > +#                      |                                       |
> > +#         ns0          |         ns1                           |
> > +#      -----------     |     -----------    -----------        |
> > +#      | veth01  | --------- | veth10  |    | veth12  |        |
> > +#      -----------    peer   -----------    -----------        |
> > +#           |          |                        |              |
> > +#      -----------     |                        |              |
> > +#      |  br0    |     |-----------------  peer |--------------|
> > +#      -----------     |                        |              |
> > +#           |          |                        |              |
> > +#      ----------     peer   ----------      -----------       |
> > +#      |  veth02 | --------- |  veth20 |     | veth21  |       |
> > +#      ----------      |     ----------      -----------       |
> > +#                      |         ns2                           |
> > +#                      |                                       |
> > +#--------------------------------------------------------------+
> > +#
> > +# We assume that all network driver are loaded
> > +#
> > +
> > +# Kselftest framework requirement - SKIP code is 4.
> > +ksft_skip=4
> > +ret=0
> > +GREEN='\033[0;92m'
> > +RED='\033[0;31m'
> > +NC='\033[0m' # No Color
> > +
> > +readonly port=8080
> > +
> > +readonly vip_v4=207.175.44.110
> > +readonly cip_v4=10.0.0.2
> > +readonly gip_v4=10.0.0.1
> > +readonly dip_v4=172.16.0.1
> > +readonly rip_v4=172.16.0.2
> > +readonly sip_v4=10.0.0.3
> > +
> > +readonly infile="$(mktemp)"
> > +readonly outfile="$(mktemp)"
> > +
> > +sysipvsnet=/proc/sys/net/ipv4/vs/
> > +if [ ! -d /proc/sys/net/ipv4/vs/ ]; then
> > +    modprobe -q ip_vs
> > +    if [ $? -ne 0 ]; then
> > +        echo "SKIP: Could not run test without ipvs module"
> > +    	exit $ksft_skip
> > +    fi
> > +fi
> > +
> > +ip -Version > /dev/null 2>&1
> > +if [ $? -ne 0 ]; then
> > +	echo "SKIP: Could not run test without ip tool"
> > +	exit $ksft_skip
> > +fi
> > +
> > +ipvsadm -v > /dev/null 2>&1
> > +if [ $? -ne 0 ]; then
> > +	echo "SKIP: Could not run test without ipvsadm"
> > +	exit $ksft_skip
> > +fi
> > +
> > +nc --version > /dev/null 2>&1
> > +if [ $? -ne 0 ]; then
> > +	echo "SKIP: Could not run test without ncat"
> > +	exit $ksft_skip
> > +fi
> > +
> > +setup() {
> > +    ip netns add ns0
> > +    ip netns add ns1
> > +    ip netns add ns2
> > +
> > +    ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
> > +    ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
> > +    ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
> > +
> > +    ip netns exec ns0 ip link set veth01 up
> > +    ip netns exec ns0 ip link set veth02 up
> > +    ip netns exec ns0 ip link add br0 type bridge
> > +    ip netns exec ns0 ip link set veth01 master br0
> > +    ip netns exec ns0 ip link set veth02 master br0
> > +    ip netns exec ns0 ip link set br0 up
> > +    ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
> > +
> > +    ip netns exec ns1 ip link set lo up
> > +    ip netns exec ns1 ip link set veth10 up
> > +    ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
> > +    ip netns exec ns1 ip link set veth12 up
> > +    ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
> > +
> > +    ip netns exec ns2 ip link set lo up
> > +    ip netns exec ns2 ip link set veth21 up
> > +    ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
> > +    ip netns exec ns2 ip link set veth20 up
> > +    ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
> > +}
> > +
> > +cleanup() {
> > +    for i in 0 1 2
> > +    do
> > +	ip netns del ns$i > /dev/null 2>&1
> > +    done
> > +    pkill nc
> > +}
> > +
> > +server_listen() {
> > +	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
> > +	server_pid=$!
> > +	sleep 0.2
> > +}
> > +
> > +client_connect() {
> > +	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
> > +}
> > +
> > +verify_data() {
> > +	wait "${server_pid}"
> > +	# sha1sum returns two fields [sha1] [filepath]
> > +	# convert to bash array and access first elem
> > +	insum=($(sha1sum ${infile}))
>
> When /bin/sh is dash the line above results in an error
>
> ./ipvs.sh: 125: ./ipvs.sh: Syntax error: "(" unexpected (expecting "}")
>
> Could you work on making the script free of bashisms.
> Or, if that proves to be an exceisive burden, use #!/bin/bash

Better use #!/bin/bash -p, to prevent bash using functions from the environment

Cheers ... Duncan.
>
> Thanks!
>
> > +	outsum=($(sha1sum ${outfile}))
> > +	if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
> > +		echo "data mismatch"
> > +		exit 1
> > +	fi
> > +}
> > +
> > +test_service() {
> > +    server_listen
> > +    client_connect
> > +    ret=$?
> > +    if [ $ret -ne 0 ]; then
> > +	return $ret
> > +    fi
> > +    verify_data
> > +}
> > +
> > +
> > +test_dr() {
> > +    ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
> > +
> > +    ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
> > +    ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
> > +    ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
> > +    ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
> > +
> > +    # avoid incorrect arp response
> > +    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
> > +    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
> > +    # avoid reverse route lookup
> > +    ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
> > +    ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
> > +    ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
> > +
> > +    test_service
> > +}
> > +
> > +run_tests() {
> > +	local errors=
> > +
> > +	echo "Testing DR mode..."
> > +	setup
> > +	test_dr
> > +	errors=$(( $errors + $? ))
> > +
> > +	return $errors
> > +}
> > +
> > +trap cleanup EXIT
> > +
> > +cleanup
> > +run_tests
> > +
> > +if [ $? -ne 0 ]; then
> > +	echo -e "$(basename $0): ${RED}FAIL${NC}"
> > +	exit 1
> > +fi
> > +echo -e "$(basename $0): ${GREEN}PASS${NC}"
> > +exit 0
> > --
> > 1.8.3.1
> >
> >
> >



[Index of Archives]     [Linux Filesystem Devel]     [Linux NFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]     [X.Org]

  Powered by Linux