On Monday 2009-07-27 15:46, Hannes Eder wrote:
>--- /dev/null
>+++ b/include/linux/netfilter/xt_ipvs.h
>@@ -0,0 +1,32 @@
>+#ifndef _XT_IPVS_H
>+#define _XT_IPVS_H 1
>+
>+#ifndef _IP_VS_H
Do the definitions (should probably be enums) exist in
very old <linux/ip_vs.h>? Then maybe you can get rid of them
from xt_ipvs.h.
>+#define IP_VS_CONN_F_FWD_MASK 0x0007 /* mask for the fwd methods */
>+#define IP_VS_CONN_F_MASQ 0x0000 /* masquerading/NAT */
>+#define IP_VS_CONN_F_LOCALNODE 0x0001 /* local node */
>+#define IP_VS_CONN_F_TUNNEL 0x0002 /* tunneling */
>+#define IP_VS_CONN_F_DROUTE 0x0003 /* direct routing */
>+#define IP_VS_CONN_F_BYPASS 0x0004 /* cache bypass */
>+#endif
>+
>+#define XT_IPVS_IPVS 0x01 /* this is implied by all other options */
>+#define XT_IPVS_PROTO 0x02
>+#define XT_IPVS_VADDR 0x04
>+#define XT_IPVS_VPORT 0x08
>+#define XT_IPVS_DIR 0x10
>+#define XT_IPVS_METHOD 0x20
>+#define XT_IPVS_MASK (0x40 - 1)
>+#define XT_IPVS_ONCE_MASK (XT_IPVS_MASK & ~XT_IPVS_IPVS)
>+
>+struct xt_ipvs {
>+ union nf_inet_addr vaddr, vmask;
>+ __be16 vport;
>+ u_int16_t l4proto;
>+ u_int16_t fwd_method;
>+
>+ u_int8_t invert;
>+ u_int8_t bitmask;
>+};
As per the "Writing Netfilter modules" e-book, __u16/__u8 is required.
>+config NETFILTER_XT_MATCH_IPVS
>+ tristate '"ipvs" match support'
>+ depends on NETFILTER_ADVANCED
>+ help
>+ This option allows you to match against ipvs properties of a packet.
>+
>+ To compile it as a module, choos M here. If unsure, say N.
>+
IMHO the "to compile it as a module, choos[e] M" is a relict from
old times and should just be dropped. These days, I stupilate,
everyone knows that M makes modules. And if it doesnot, then
it's not allowed by Kconfig :>
>+MODULE_AUTHOR("Hannes Eder <heder@xxxxxxxxxx>");
>+MODULE_DESCRIPTION("Xtables: match ipvs");
"Match IPVS connection properties" is what you previously stated,
and which I think is good. Use it here, too.
>+bool ipvs_mt(const struct sk_buff *skb, const struct xt_match_param *par)
>+{
>+ const struct xt_ipvs *data = par->matchinfo;
>+ const u_int8_t family = par->family;
>+ struct ip_vs_iphdr iph;
>+ struct ip_vs_protocol *pp;
>+ struct ip_vs_conn *cp;
>+ int af;
>+ bool match = true;
>+
>+ if (data->bitmask == XT_IPVS_IPVS) {
>+ match = !!(skb->ipvs_property)
>+ ^ !!(data->invert & XT_IPVS_IPVS);
>+ goto out;
>+ }
XT_IPVS_IPVS? What's that supposed to tell me...
Anyway, this can be made much shorter, given that all following
the "out" label is a return:
if (data->bitmask == XT_IPVS_IPVS)
return skb->ipvs_property ^ !!(data->invert & XT_IPVS_IPVS);
>+ /* other flags than XT_IPVS_IPVS are set */
>+ if (!skb->ipvs_property) {
>+ match = false;
>+ goto out;
>+ }
if (!skb->ipvs_property)
return false;
>+ ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
>+
>+ if (data->bitmask & XT_IPVS_PROTO)
>+ if ((iph.protocol == data->l4proto)
>+ ^ !(data->invert & XT_IPVS_PROTO)) {
>+ match = false;
>+ goto out;
>+ }
if (iph.protocol == data->l4proto ^
!(data->invert & XT_IPVS_PROTO))
return false;
>+ pp = ip_vs_proto_get(iph.protocol);
>+ if (unlikely(!pp)) {
>+ match = false;
>+ goto out;
>+ }
if (unlikely(pp == NULL))
return false;
Only after here we really need goto (to put pp).
>+ /*
>+ * Check if the packet belongs to an existing entry
>+ */
>+ /* TODO: why does it only match in inverse? */
FIXME: Figure it out :)
>+ cp = pp->conn_out_get(af, skb, pp, &iph, iph.len, 1 /* inverse */);
>+ if (unlikely(!cp)) {
>+ match = false;
>+ goto out;
>+ }
>+
>+ /*
>+ * We found a connection, i.e. ct != 0, make sure to call
>+ * __ip_vs_conn_put before returning. In our case jump to out_put_con.
>+ */
>+
>+ if (data->bitmask & XT_IPVS_VPORT)
>+ if ((cp->vport == data->vport)
>+ ^ !(data->invert & XT_IPVS_VPORT)) {
>+ match = false;
>+ goto out_put_ct;
>+ }
>+
>+ if (data->bitmask & XT_IPVS_DIR) {
>+ /* TODO: implement */
/* Yes please */
>+ }
>+
>+ if (data->bitmask & XT_IPVS_METHOD)
>+ if (((cp->flags & IP_VS_CONN_F_FWD_MASK) == data->fwd_method)
>+ ^ !(data->invert & XT_IPVS_METHOD)) {
>+ match = false;
>+ goto out_put_ct;
>+ }
>+
>+ if (data->bitmask & XT_IPVS_VADDR) {
>+ if (af != family) {
>+ match = false;
>+ goto out_put_ct;
>+ }
>+
>+ if (ipvs_mt_addrcmp(&cp->vaddr, &data->vaddr, &data->vmask, af)
>+ ^ !(data->invert & XT_IPVS_VADDR)) {
I think the operator (^ in this case) always goes onto the same line as the ')'
((a) ^\n(b), not ((a)\n ^(b)), though some legacy code seems to do it
random so-so.)
>+ return match;
>+}
>+EXPORT_SYMBOL(ipvs_mt);
What will be using ipvs_mt?
>+static struct xt_match xt_ipvs_mt_reg[] __read_mostly = {
>+ {
>+ .name = "ipvs",
>+ .revision = 0,
>+ .family = NFPROTO_UNSPEC,
>+ .match = ipvs_mt,
>+ .matchsize = sizeof(struct xt_ipvs),
>+ .me = THIS_MODULE,
>+ },
>+};
There is just one element, so no strict need for the [] array.
--
To unsubscribe from this list: send the line "unsubscribe lvs-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
