Dne 20.6.2018 v 11:18 Ryan Launchbury napsal(a):
Hello,
I'm having a problem uncaching logical volumes when the cache data chunck size
is over 1MiB.
The process I'm using to uncache is: lvconvert --uncache vg/lv
The issue occurs across multiple systems with different hardware and different
versions of LVM.
Steps to reproduce:
1. Create origin VG & LV
2. Add cache device over 1TB to the origin VG
3. Create the cache data lv:
lvcreate -n cachedata -L 1770GB cached_vg /dev/nvme0n1
4. Create the cache metadata lv:
lvcreate -n cachemeta -L 1770MB cached_vg /dev/nvme0n1
5. Convert to a cache pool:
lvconvert --type cache-pool --cachemode writethrough --poolmetadata
cached_vg/cachemeta cached_vg/cachedata
6. Enable caching on the origin LVM:
lvconvert --type cache --cachepool cached_vg/cachedata cached_vg/filestore01
7. Write some data to the main LV so as the cache device is used:
dd if=/dev/zero of=/mnt/filestore01/test.dat bs=1M count=10000
8. Check the cache stats:
lvs -a -o +cache_total_blocks,cache_used_blocks,cache_dirty_blocks
9. Repeating step 8 over time will show that the dirty blocks are not being
written back at all
10. Try to uncache the device:
lvconvert --uncache cached_vg/filestore01
11. You will get a repeating message. This will loop indefinitely and not
decrease or complete:
Flushing x blocks for cache cached_vg/filestore01.
After testing multiple times, the issue seems to be tied to the chunk size
selected in step 5. The LVM man page mentions that the chunk must be a
multiple of 32KiB, however the next chunk size automatically assigned over
1MiB is usually 1.03MiB. With a chunk size of 1.03MiB or higher, the cache is
not able to flush. Creating a cache device with a chunk size of 1MiB or less,
the cache is flushable.
Now knowing how to avoid the issue, I just need to be able to safely un-cache
systems with do have a cache that will not flush.
Details:
Version info from lvm version:
LVM version: 2.02.171(2)-RHEL7 (2017-05-03)
Library version: 1.02.140-RHEL7 (2017-05-03)
Driver version: 4.35.0
What is the kernel version and Linux distro in use ?
System info:
System 1,2,3:
- Dell R730XD server
- 12x disk in RAID 6 to onboard PERC/Megaraid controller
System 4:
-Dell R630 server
-60x Disk (6 luns) in RAID 6 to PCI megaraid controller
The systems are currently in production, so it's quite hard for me to change
the configuration to enable logging.
Any assistance would be much appreciated! If any more info is needed please
let me know.
Hi
Aren't there any kernel write errors in your 'dmegs'.
LV becomes fragile if the associated devices with cache are having HW issues
(disk read/write errors)
Zdenek
_______________________________________________
linux-lvm mailing list
linux-lvm@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
