I did as follow and it works, without storing the metadata on zram:
truncate -s500M disk1.dd
truncate -s500M disk2.dd
losetup /dev/loop0 /root/disk1.dd
losetup /dev/loop1 /root/disk2.dd
pvcreate /dev/loop0
pvcreate /dev/loop1
vgcreate vg00/dev/loop0 /dev/loop1
vgcreate vg00 /dev/loop0 /dev/loop1
lvcreate --type raid1 --name raid1vol -L 400M vg00
[root@puppetserver:~# lvs -ao +devices
LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert Devices
raid1vol vg00 rwi-a-m- 400.00m 100.00 raid1vol_rimage_0(0),raid1vol_rimage_1(0)
[raid1vol_rimage_0] vg00 iwi-aor- 400.00m /dev/loop0(1)
[raid1vol_rimage_1] vg00 iwi-aor- 400.00m /dev/loop1(1)
[raid1vol_rmeta_0] vg00 ewi-aor- 4.00m /dev/loop0(0)
[raid1vol_rmeta_1] vg00 ewi-aor- 4.00m /dev/loop1(0)
Now I will the metadata to other pvs:truncate -s500M disk1.dd
truncate -s500M disk2.dd
losetup /dev/loop0 /root/disk1.dd
losetup /dev/loop1 /root/disk2.dd
pvcreate /dev/loop0
pvcreate /dev/loop1
vgcreate vg00/dev/loop0 /dev/loop1
vgcreate vg00 /dev/loop0 /dev/loop1
lvcreate --type raid1 --name raid1vol -L 400M vg00
[root@puppetserver:~# lvs -ao +devices
LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert Devices
raid1vol vg00 rwi-a-m- 400.00m 100.00 raid1vol_rimage_0(0),raid1vol_rimage_1(0)
[raid1vol_rimage_0] vg00 iwi-aor- 400.00m /dev/loop0(1)
[raid1vol_rimage_1] vg00 iwi-aor- 400.00m /dev/loop1(1)
[raid1vol_rmeta_0] vg00 ewi-aor- 4.00m /dev/loop0(0)
[raid1vol_rmeta_1] vg00 ewi-aor- 4.00m /dev/loop1(0)
truncate -s 100M meta1.dd
truncate -s 100M meta2.dd
losetup /dev/loop2 meta1.dd
losetup /dev/loop3 meta2.dd
vgextend vg00 /dev/loop2
vgextend vg00 /dev/loop3
pvmove -n 'raid1vol_rmeta_0' /dev/loop0 /dev/loop2
pvmove -n 'raid1vol_rmeta_1' /dev/loop1 /dev/loop3
vgchange -an vg00
0 logical volume(s) in volume group "vg00" now active
0 logical volume(s) in volume group "vg00" now active
vgchange -ay vg00
1 logical volume(s) in volume group "vg00" now active
1 logical volume(s) in volume group "vg00" now active
2017-09-25 11:30 GMT+02:00 Alexander 'Leo' Bergolth <leo@strike.wu.ac.at>:
Hi!
I tried to move the raid1 metadata subvolumes to different PVs (SSD devices for performance).
Moving with pvmove works fine but activation fails when both legs of the metadata had been moved to external devices. (See below.)
Interestingly moving just one metadata LV to another device works fine. (Raid LV can be activated afterwards.)
I guess raid1 metadata on different PVs is not supported (yet)?
I am using Centos 7.4 and kernel 3.10.0-693.el7.x86_64.
Cheers,
--leo
-------------------- 8< --------------------
modprobe zram num_devices=2
echo 300M > /sys/block/zram0/disksize
echo 300M > /sys/block/zram1/disksize
pvcreate /dev/sda2
pvcreate /dev/sdb2
pvcreate /dev/zram0
pvcreate /dev/zram1
vgcreate vg_sys /dev/sda2 /dev/sdb2 /dev/zram0 /dev/zram1
lvcreate --type raid1 -m 1 --regionsize 64M -L 500m -n lv_boot vg_sys /dev/sda2 /dev/sdb2
pvmove -n 'lv_boot_rmeta_0' /dev/sda2 /dev/zram0
# and maybe
# pvmove -n 'lv_boot_rmeta_1' /dev/sdb2 /dev/zram1
-------------------- 8< --------------------
Creating vg_sys-lv_boot
dm create vg_sys-lv_boot LVM-l6Eg7Uvcm2KieevnXDjLLje3wqmSVG a1e56whxycwUR2RvGvcQNLy1Gdfpzl ZuQk [ noopencount flush ] [16384] (*1)
Loading vg_sys-lv_boot table (253:7)
Getting target version for raid
dm versions [ opencount flush ] [16384] (*1)
Found raid target v1.12.0.
Adding target to (253:7): 0 1024000 raid raid1 3 0 region_size 8192 2 253:3 253:4 253:5 253:6
dm table (253:7) [ opencount flush ] [16384] (*1)
dm reload (253:7) [ noopencount flush ] [16384] (*1)
device-mapper: reload ioctl on (253:7) failed: Input/output error
-------------------- 8< --------------------
[ 8130.110467] md/raid1:mdX: active with 2 out of 2 mirrors
[ 8130.111361] mdX: failed to create bitmap (-5)
[ 8130.112254] device-mapper: table: 253:7: raid: Failed to run raid array
[ 8130.113154] device-mapper: ioctl: error adding target to table
-------------------- 8< --------------------
# lvs -a -o+devices
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert Devices
lv_boot vg_sys rwi---r--- 500.00m lv_boot_rimage_0(0),lv_boot_rimage_1(0)
[lv_boot_rimage_0] vg_sys Iwi-a-r-r- 500.00m /dev/sda2(1)
[lv_boot_rimage_1] vg_sys Iwi-a-r-r- 500.00m /dev/sdb2(1)
[lv_boot_rmeta_0] vg_sys ewi-a-r-r- 4.00m /dev/zram0(0)
[lv_boot_rmeta_1] vg_sys ewi-a-r-r- 4.00m /dev/zram1(0)
-------------------- 8< --------------------
Full vgchange output can be found at:
http://leo.kloburg.at/tmp/lvm-raid1-ext-meta/
--
e-mail ::: Leo.Bergolth (at) wu.ac.at
fax ::: +43-1-31336-906050
location ::: IT-Services | Vienna University of Economics | Austria
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
--
.~.
/V\
// \\
/( )\
^`~'^
/V\
// \\
/( )\
^`~'^
_______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
