On 04/10/2017 01:16 PM, lejeczek wrote:
I had 3 stripe LV, you know, three PVs, and wanted the LV to have 4 stripes, wanted to add 4th PV, you can see it from above lvdisplay.
What you want is "reshape" not extend. This was committed as RAID feature to 2.02.169, but it is still somewhat experimental. You would need to convert stripe LV to RAID0 (aka takeover) and then reshape.
I tried these and each time it errored: $ lvextend -v -i 4 -l+100%free dellH200.InternalB/0 $ lvextend -v -i 4 -l+100%pv dellH200.InternalB/0 /dev/sdf $ lvextend -i 4 -l 100%vg dellH200.InternalB/0
lvextend With -i 4 this would add another striped segment with 4 devices after the first segment - and IIUC you do not have enough space for that.
I did have only one segment, an LV spanning 100%vg with 100%each-pv. And the above is the result of: $ lvextend -i 1 -l +100%free dellH200.InternalB/0 /dev/sdf so, either I'm not getting it right or a stripped LV cannot be extended this way - then: is there performance penalty with segments like above vs one stripped segment? _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
_______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
