On 17.03.2016 00:00, Stuart Gathman wrote:
On 03/16/2016 05:36 PM, Raimonds Cicans wrote:
I am trying to move LVM setup from old RAID md0 to new RAID md1
I did "lvconvert -m 1 /dev/path/to/logical_volume /dev/md1" on bunch
of logical volumes.
Everything went without problems.
Then I tried to remove md0 from one of logical volumes by running
command:
lvconvert -m 0 /dev/varlin/distfiles /dev/md0
I tried to mount this logical volume, but failed.
Then I checked first megabyte of logical volume it was zero filled.
Partial output of "lvs -o+devices":
LV VG Attr LSize Pool Origin Data% Meta%
Move Log Cpy%Sync Convert Devices
backup varlin -wi-ao---- 100,00g /dev/md0(6304)
backup varlin -wi-ao---- 100,00g /dev/md0(8544)
data varlin -wi-ao---- 20,00g /dev/md0(28384)
distfiles varlin -wi-a----- 20,00g /dev/md1(2738)
ftp varlin rwi-aor--- 10,00g 100,00
ftp_rimage_0(0),ftp_rimage_1(0)
ftpdown varlin rwi-aor--- 10,00g 100,00
ftpdown_rimage_0(0),ftpdown_rimage_1(0)
lvm2: 2.02.116
kernel: 4.4.2
Questions:
1) What I did wrong?
I would have used pvmove. Using lvconvert, I think you needed to sync
the mirrors before removing a leg.
How do I sync mirror before removing leg? I thought 100 in Cpy%Sync
column mean - everything is in sync.
Best regards,
Raimonds Cicans
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
