Hello Vassiliy
Do the other way around :
Make an array using mdadm (md0)
Run pvcreate on it and build your VG with this (these) PVs. (pvcreate
/dev/md0)
Then build all the LV you want on this VG
Le 08/06/2015 07:33, Vasiliy Tolstov a écrit :
Hi. I have such hardware:
/dev/sda /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf (500Gb ssd)
1) i want to create raid1 using lvm raid1 personalities with 100Mb
size on top of this disk
2) i want to create lv and format it to ext4/xfs of free space on each disk
If this is not possible with only lvm, how i can do this ? ( simple
create two lv on each disk and create via mdadm raid1? )
--
If the only tool you have is a hammer, you tend to see every problem as a nail.
Abraham Maslow
A British variant :
Any tool can serve as a hammer but a screwdriver makes the best chisel.
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
