Try passing the -K flag with vgchange.
# vgchange -Kay
Jack Waterworth, Red Hat Certified Architect
Senior Storage Technical Support Engineer
Red Hat Global Support Services ( 1.888.467.3342 )
On 12/03/2014 11:12 AM, Rock wrote:
Hello All,
I have two PV's with Thin Volumes within them.
Im not able to mount or activate either after trying to
vgcfgrestore one of them.
PV,VG and LV display/scan all show volumes
but cant activate them or mount them.
I ran the following command to restore the thin volume
from the metadata file in /etc/lvm/archive.
vgcfgrestore --force -f
/etc/lvm/archive/vg_sfim_00640-658506285.vg vg_sfim
Scan commands:
[root@erbium ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 vg_erbium lvm2 a-- 59.51g 0
/dev/sdb vg_sfim lvm2 a-- 29.80t 0
/dev/sdc vg_sfim lvm2 a-- 6.58t 0
/dev/sdd vg_fmrif lvm2 a-- 36.39t 0
You have new mail in /var/spool/mail/root
[root@erbium ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg_erbium 1 3 0 wz--n- 59.51g 0
vg_fmrif 1 14 0 wz--n- 36.39t 0
vg_sfim 2 3 0 wz--n- 36.39t 0
[root@erbium ~]# lvs
lv_home vg_erbium -wi-ao---- 3.19g
lv_root vg_erbium -wi-ao---- 32.68g
lv_swap vg_erbium -wi-ao---- 23.64g
lv_fmrif vg_fmrif Vwi---tz-- 20.00t thinpool
lv_fmrif_2014_11_20_23_00 vg_fmrif Vwi---tz-k 20.00t thinpool lv_fmrif
lv_fmrif_2014_11_21_23_00 vg_fmrif Vwi---tz-k 20.00t thinpool lv_fmrif
lv_fmrif_2014_11_22_23_00 vg_fmrif Vwi---tz-k 20.00t thinpool lv_fmrif
lv_fmrif_2014_11_23_23_00 vg_fmrif Vwi---tz-k 20.00t thinpool lv_fmrif
lv_fmrif_2014_11_24_23_00 vg_fmrif Vwi---tz-k 20.00t thinpool lv_fmrif
lv_fmrif_2014_11_25_23_00 vg_fmrif Vwi---tz-k 20.00t thinpool lv_fmrif
lv_users vg_fmrif Vwi---tz-- 1.00t thinpool
lv_users_2014_11_21_23_00 vg_fmrif Vwi---tz-k 1.00t thinpool lv_users
lv_users_2014_11_22_23_00 vg_fmrif Vwi---tz-k 1.00t thinpool lv_users
lv_users_2014_11_23_23_00 vg_fmrif Vwi---tz-k 1.00t thinpool lv_users
lv_users_2014_11_24_23_00 vg_fmrif Vwi---tz-k 1.00t thinpool lv_users
lv_users_2014_11_25_23_00 vg_fmrif Vwi---tz-k 1.00t thinpool lv_users
thinpool vg_fmrif twi---tz-- 36.39t
lv_sfim vg_sfim Vwi---tz-k 35.00t sfim_thinpool
lv_sfim_2014_11_23_23_00 vg_sfim Vwi---tz-k 35.00t sfim_thinpool
sfim_thinpool vg_sfim twi---tz-- 36.39t
cant seam to activate them when i do a vgchange.
Get the following output:
[root@erbium ~]# vgchange -ay
Check of pool vg_fmrif/thinpool failed (status:1). Manual repair required!
0 logical volume(s) in volume group "vg_fmrif" now active
Thin pool transaction_id is 649, while expected 647.
0 logical volume(s) in volume group "vg_sfim" now active
3 logical volume(s) in volume group "vg_erbium" now active
Also dmsetup command used to show me the volumes in question,
however after reboot it does not
[root@erbium ~]# dmsetup info -c
Name Maj Min Stat Open Targ Event UUID
vg_erbium-lv_root 253 0 L--w 1 1 0 LVM-
vg_erbium-lv_home 253 2 L--w 1 1 0 LVM-
vg_erbium-lv_swap 253 1 L--w 1 1 0 LVM-
[root@erbium ~]# dmsetup table
vg_erbium-lv_root: 0 68534272 linear 8:2 2048
vg_erbium-lv_home: 0 6684672 linear 8:2 68536320
vg_erbium-lv_swap: 0 49577984 linear 8:2 75220992
[root@erbium ~]# dmsetup status
vg_erbium-lv_root: 0 68534272 linear
vg_erbium-lv_home: 0 6684672 linear
vg_erbium-lv_swap: 0 49577984 linear
Any help would be greatly appreciated.
Thanks in advance
Rock
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
