Hi
Request you to help me with the issue resolution.
I am getting vgchange addtag error sometimes when my vg is trying to come online. Not able to get the reason behind this. It's a random behaviour and may not occur next time when the same package fails over to this node and will successfully come online.
WARNING: Locking disabled. Be careful! This could corrupt your metadata.
vg_tag
Attempting to addtag to vg TestVG21...
vgchange --addtag error:
WARNING: Locking disabled. Be careful! This could corrupt your metadata. /dev/mpath/mpath89: write failed after 0 of 4096 at 8192: Operation not permitted
Activating volume group TestVG21 .
sg_filesystems
sg_check_and_mount
Checking filesystems:
/dev/TestVG21/TestLV21
e2fsck 1.39 (29-May-2006)
e2fsck: No such file or directory while trying to open /dev/TestVG21/TestLV21
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
In the similar environment sometimes i also get this error:
mount: unknown filesystem type 'ext3'
----- Forwarded Message -----
From: Perry Myers <pmyers@redhat.com>
To: shashank khandelwal <khandu20@yahoo.com>
Cc: "fdinitto@redhat.com" <fdinitto@redhat.com>; Lon Hohberger <lhh@redhat.com>
Sent: Tuesday, June 5, 2012 1:27 AM
Subject: Re: Fw: Query on vgchange: Please help
On 06/04/2012 03:45 PM, shashank khandelwal wrote:
> Hi
>
> Since Lon is out of office would request you to help me with the query.
Hi,
I'm more on the management side so probably can't help you much with
technical issues. Have you emailed your question to one of the upstream
mailing lists? I'm sure Fabio or someone upstream can help you with the
below question.
Thanks,
Perry
> Regards
> Sk
>
> ----- Forwarded Message -----
> *From:* shashank khandelwal <khandu20@yahoo.com>
> *To:* Lon Hohberger <lhh@redhat.com>
> *Cc:* "fdinitto@redhat.com" <fdinitto@redhat.com>
> *Sent:* Tuesday, June 5, 2012 1:13 AM
> *Subject:* Query on vgchange: Please help
>
> Hi Lon
>
> Bothering you again for one of my cluster software related issue.
> I am getting vgchange addtag error sometimes when my vg is trying to
> come online. Not able to get the reason behind this. It's a random
> behaviour and may not occur next time when the same package fails over
> to this node and will successfully come online.
>
> WARNING: Locking disabled. Be careful! This could corrupt your metadata.
> vg_tag
> Attempting to addtag to vg TestVG21...
> vgchange --addtag error:
> WARNING: Locking disabled. Be careful! This could corrupt your metadata.
> /dev/mpath/mpath89: write failed after 0 of 4096 at 8192: Operation not
> permitted
> Activating volume group TestVG21 .
> sg_filesystems
> sg_check_and_mount
> Checking filesystems:
> /dev/TestVG21/TestLV21
> e2fsck 1.39 (29-May-2006)
> e2fsck: No such file or directory while trying to open
> /dev/TestVG21/TestLV21
>
> The superblock could not be read or does not describe a correct ext2
> filesystem. If the device is valid and it really contains an ext2
> filesystem (and not swap or ufs or something else), then the superblock
> is corrupt, and you might try running e2fsck with an alternate superblock:
> e2fsck -b 8193 <device>
>
> In the similar environment sometimes i also get this error:
>
> mount: unknown filesystem type 'ext3'
>
>
From: Perry Myers <pmyers@redhat.com>
To: shashank khandelwal <khandu20@yahoo.com>
Cc: "fdinitto@redhat.com" <fdinitto@redhat.com>; Lon Hohberger <lhh@redhat.com>
Sent: Tuesday, June 5, 2012 1:27 AM
Subject: Re: Fw: Query on vgchange: Please help
On 06/04/2012 03:45 PM, shashank khandelwal wrote:
> Hi
>
> Since Lon is out of office would request you to help me with the query.
Hi,
I'm more on the management side so probably can't help you much with
technical issues. Have you emailed your question to one of the upstream
mailing lists? I'm sure Fabio or someone upstream can help you with the
below question.
Thanks,
Perry
> Regards
> Sk
>
> ----- Forwarded Message -----
> *From:* shashank khandelwal <khandu20@yahoo.com>
> *To:* Lon Hohberger <lhh@redhat.com>
> *Cc:* "fdinitto@redhat.com" <fdinitto@redhat.com>
> *Sent:* Tuesday, June 5, 2012 1:13 AM
> *Subject:* Query on vgchange: Please help
>
> Hi Lon
>
> Bothering you again for one of my cluster software related issue.
> I am getting vgchange addtag error sometimes when my vg is trying to
> come online. Not able to get the reason behind this. It's a random
> behaviour and may not occur next time when the same package fails over
> to this node and will successfully come online.
>
> WARNING: Locking disabled. Be careful! This could corrupt your metadata.
> vg_tag
> Attempting to addtag to vg TestVG21...
> vgchange --addtag error:
> WARNING: Locking disabled. Be careful! This could corrupt your metadata.
> /dev/mpath/mpath89: write failed after 0 of 4096 at 8192: Operation not
> permitted
> Activating volume group TestVG21 .
> sg_filesystems
> sg_check_and_mount
> Checking filesystems:
> /dev/TestVG21/TestLV21
> e2fsck 1.39 (29-May-2006)
> e2fsck: No such file or directory while trying to open
> /dev/TestVG21/TestLV21
>
> The superblock could not be read or does not describe a correct ext2
> filesystem. If the device is valid and it really contains an ext2
> filesystem (and not swap or ufs or something else), then the superblock
> is corrupt, and you might try running e2fsck with an alternate superblock:
> e2fsck -b 8193 <device>
>
> In the similar environment sometimes i also get this error:
>
> mount: unknown filesystem type 'ext3'
>
>
_______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
