On 04/12/2012 01:14 PM, Erik Schwalbe wrote: > The symlink in /dev/data/ is: > > lrwxrwxrwx 1 root root 24 2012-04-05 12:51 kvm_disk0 -> ../mapper/data-kvm_disk0 OK, you're using an older LVM2/device-mapper that does not use udev to manage the device nodes and symlinks in /dev. > Should I be using this: > > filter = [ "r|/dev/mapper/data-kvm_disk0|", "r|/dev/kvm_disk0|", "a|.*|"] Yes. Or use the alternate style I showed and only accept the PVs belonging to the data VG. As Lars said you may also need to rebuild your initramfs although if the data VG doesn't contain your root file system, swap or other resources normally set up in the initramfs this shouldn't be needed. Regards, Bryn. _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
