On Fri, 17 Jun 2011 00:11 -0400, "Stuart D. Gathman" <stuart@bmsi.com> wrote: > On Thu, 16 Jun 2011, Lee Gold wrote: > > > How can this be right? I clearly remember installing the /boot as an > > ext3 partiton. > > > > sudo pvs says: > > > > PV VG Fmt Attr PSize PFree > > > > /dev/sda1 lvm2 a- 190.00m 190.00m > > > > /dev/sda2 system lvm2 a- 92.97g 0 > > > > I can mount the partitons in /dev/sda2 by installing LVM2 while using > > the live disk and some command-line - so I can recover the data if > > necessay so all is not lost. But I would really like to know what is > > going on and how to get the system booting again. Again the boot > > partition was ext3 and separate, why can't I access it, fdisk > > confirms...? Thanks. > > I would suspect that sda and sdb do not point to the disks you think > they do. BIOS often swaps these around without warning. You don't > mention > your physical connection (IDE/SATA/USB/FW/iSCSI/...). This would give a > clue > as to what BIOS might have done - although it really isn't an LVM > question. > This is why it is preferred to use filesystem/PV UUIDs or labels > rather that whatever the current device address happens to be. > > So it looks like you made /boot into a PV, although pvcreate should have > warned that the block device was mounted. > In my opinion LVM2 should of flagged me when it went about changing my config - which it did - the boot partition's location and spec could not of changed on it's own and while the bios could shuffle things around only an active script could of changed things as it did and it should have warned me - that's Comp Sci 101 - when something happens pull over to the side of the road AND put your indicator on too. Maybe I'm wrong but if I am it's moot. "Once burned twice shy". -- http://www.fastmail.fm - Access all of your messages and folders wherever you are _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
