Thank you; but I've tried that command. It gives me the output below; however, I want to ensure that /dev/md10 [root_vg] resides on the internal disks. How can I ensure that?
PV VG Fmt Attr PSize PFree
/dev/dm-10 san_vg lvm2 a- 299.99G 0
/dev/dm-9 san_vg lvm2 a- 174.99G 0
/dev/md10 root_vg lvm2 a- 68.22G 12.44G
Regards,
> Date: Wed, 14 Apr 2010 07:21:51 +0200
> From: bluca@comedia.it
> To: linux-lvm@redhat.com
> Subject: Re: [linux-lvm] How do I tell what disk a volume group reside on
>
> On Tue, Apr 13, 2010 at 08:59:40PM -0400, Vickie Troy-McKoy wrote:
> >
> >Hi All,
> >
> >
> >
> >I have a RedHat4 server connected to a SAN 3510 Array. On the host server, there are two volume groups set up--root_vg and san_vg. I'm assuming that root_vg resides on the internal disks and san_vg on the SAN. But, how can I check to make sure this is the case?
> >
> vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
> >read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> try with the pvs command
>
> --
> Luca Berra -- bluca@comedia.it
> Communication Media & Services S.r.l.
> /"\
> \ / ASCII RIBBON CAMPAIGN
> X AGAINST HTML MAIL
> / \
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. See how.
|
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
