imgserv:/storage/# vgchange -ay
device-mapper: resume ioctl failed: Invalid argument
Unable to resume storage-storage (254:0)
1 logical volume(s) in volume group "storage" now active
imgserv:/storage/# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 storage lvm2 a- 1.44T 0
/dev/sdb1 storage lvm2 a- 1.09T 0
/dev/sdc1 storage lvm2 a- 1.09T 4.98G
imgserv:/storage/# pvdisplay
--- Physical volume ---
PV Name /dev/sda3
VG Name storage
PV Size 1.44 TB / not usable 1.51 MB
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 378339
Free PE 0
Allocated PE 378339
PV UUID ddnHh1-BvAl-5zpd-8KFT-YnZ8-MWHp-pQAWs1
--- Physical volume ---
PV Name /dev/sdb1
VG Name storage
PV Size 1.09 TB / not usable 3.73 MB
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 285949
Free PE 0
Allocated PE 285949
PV UUID Qhl3tF-JWTY-ORbb-liI9-XteR-vlY9-wtInW5
--- Physical volume ---
PV Name /dev/sdc1
VG Name storage
PV Size 1.09 TB / not usable 3.73 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 285949
Free PE 1275
Allocated PE 284674
PV UUID Z6h80h-oZfP-QMPW-iZdt-dGL0-haBJ-r93Ooi
On Tue, Jul 21, 2009 at 1:58 PM, Ray Van Dolson<rvandolson@esri.com> wrote:
> On Tue, Jul 21, 2009 at 12:55:50PM -0700, Adam Olsen wrote:
>> This pretty much sums it up:
>>
>> imgserv:/storage/# lvscan
>> ACTIVE '/dev/storage/storage' [3.62 TB] inherit
>> imgserv:/storage/# fdisk /dev/storage/storage
>>
>> Unable to read /dev/storage/storage
>>
>> I can't mount it, access it with fdisk. Here's the lvdisplay output:
>>
>> imgserv:/storage/# lvdisplay
>> --- Logical volume ---
>> LV Name /dev/storage/storage
>> VG Name storage
>> LV UUID Cw8aAr-YHsR-oVfH-7AAx-2ppa-Zm3M-U9z1eA
>> LV Write Access read/write
>> LV Status available
>> # open 0
>> LV Size 3.62 TB
>> Current LE 948962
>> Segments 3
>> Allocation inherit
>> Read ahead sectors auto
>> - currently set to 256
>> Block device 254:0
>>
>> This is on debian etch. This is what I see at the end of dmesg:
>>
>> cdrom: open failed.
>> hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
>> hdc: packet command error: error=0x54
>>
>> Which I don't think has anything to do with this problem, as hdc is
>> NOT one of the physical volumes... it's a cdrom drive.
>>
>> Is there anything I can do to debug this?
>>
>
> You've already done a vgchange -ay on the volgroup? What's the output
> of pvs/pvdisplay?
>
> Ray
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
>
--
Adam Olsen
SendOutCards.com
http://www.vimtips.org
http://last.fm/user/synic
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
