Hi all, I'm playing a bit with lvm/raid on linux, (on a pretty
experimental box) and now I'm facing a problem that leaves me a bit
stuck
Basically, I've a volume group based on several mdraid partition
(vg1 with md0/md1/md4 as pvs)
recently I've increased the size of md1/md4 arrays by adding more
disks and /proc/mdstats shows that the operation was successful.
the I've issued a "pvresize" command on /dev/md1 and md4 to make lvm
aware of new size, but I get the following error:
pvresize -v /dev/md1
Using physical volume(s) on command line
Archiving volume group "vg1" metadata (seqno 12).
/dev/md1: too many metadata areas for pvresize
0 physical volume(s) resized / 1 physical volume(s) not resized
pvck -v /dev/md1
Scanning /dev/md1
Found label on /dev/md1, sector 1, type=LVM2 001
Found text metadata area: offset=4096, size=192512
Found LVM2 metadata record at offset=10240, size=2048, offset2=0 size2=0
Found LVM2 metadata record at offset=9728, size=512, offset2=0 size2=0
Found LVM2 metadata record at offset=8192, size=1536, offset2=0 size2=0
Found text metadata area: offset=386587820032, size=131072
Found LVM2 metadata record at offset=386587826176, size=2048,
offset2=0 size2=0
Found LVM2 metadata record at offset=386587824128, size=2048,
offset2=0 size2=0
Found LVM2 metadata record at offset=386587822592, size=1536,
offset2=0 size2=0
Can someone give me some hint, to shed some light on what's going on?
obviously I've made something wrong, but I can't figure what (maybe
unusual or not the best way to increase space, ok, but I can't figure
out what's up).
Thanks for any answer.
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
