The information shown from a nov 2007 post has been very useful - much appreciated.
There are some circumstances with the case I am working on that complicates the process a bit.
After having removed the master volume from the host and presenting just a snapshot, I have been able to change the physical uuid, and rename the volume group. If I then re-introduce the master volume there is no conflict (no-duplicates) found by the lvm utilities and can mount both sucessfully.
The constraints I am operating under require the master volume not to disappear - i.e. production system and volume.
If I filter out the snapshot and leave the accept (a) portion - "a|.*|" in the filter line, then a conflict is reported by pvscan, but not between sda and sdb but between sdb and the device-mapper string that appears to use the FC WWN.
If I remove the accept portion then there is no conflict during pvscan.
If I attempt to do a --
pvchange --uuid /dev/sda
Failed to read physical volume /dev/sda
0 physical volumes changed / 0 physical volumes not changed
Is the filtered out device name (/dev/sda) supposed to be available to the lvm utilities?
thanks,
mike
From: Alasdair G Kergon <agk@redhat.com>
To: LVM general discussion and development <linux-lvm@redhat.com>
Sent: Friday, November 14, 2008 6:55:15 PM
Subject: Re: Editing LVM 2 metadata
On Fri, Nov 14, 2008 at 06:37:51PM -0800, Michael Jensen wrote:
> I have a need to edit the metadata on an LVM2 PV.
Why?
If you really have to, please do this using the supplied tools - it's *much*
easier!
vgcfgbackup gives you a text file, edit it, vgcfgrestore puts it back.
If you need to edit the label too, careful use of pvcreate --restorefile --uuid
plus vgcfgrestore lets you do that.
Alasdair
--
agk@redhat.com
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
_______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
