On Mon, Jun 9, 2008 at 8:23 AM, Girish V <girish.xen@gmail.com> wrote: > Hello, > > I have a disk.img (a disk image file, raw format) with the following "fdisk -l" > > Device Boot Start End Blocks Id System > disk.img1 * 1 13 104391 83 Linux > disk.img2 14 2491 19904535 8e Linux LVM > > Now I can loopback mount the first bartition using > "mount -o loop,offset=32256 disk.img /mnt". > > I need to mount the second partition. If the secoond partition had > been an ext3 partition, I would have loopback mounted it as > "mount -o loop,offset=$((255*63*512*13) disk.img /mnt", but when I try > that, I get > mount: unknown filesystem type 'LVM2_member' > > Any help is greatly appreciated. losetup /dev/loop0 disk.img kpartx -a /dev/loop0 Then to mount the first partition: mount /dev/mapper/loop0p1 /mnt Or to activate the volume group then mount the logical volume: vgscan vgchange -ay vg mount /dev/vg/lv /mnt Hope that helps. --Dave _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
