On Wed, 23 Jan 2008, Jim Secan wrote:
> The issue is trying to mount a drive that was the primary internal HD for
> a system with a failed motherboard. The disk was built using FC3, and has
> a a /boot partition and one under LVM control. When I try to mount this
> disk as a USB drive from a CentOS system, I can't mount the LVM-controlled
> partition because it has the same LVM volume/group name as the disk in the
> CentOS system.
...
> 2. Rename the volume on the USB HD. This requires me to power down the
> CentOS system, open the box, disconnect the internal HD, boot to the
> installation CD in rescue mode, use lvm commands to rename the USB HD, and
> then put everything back together again. This sounds overly complicated,
> but necessary.
>
> So, have I understood all this correctly? Are these the only two ways in
> which this problem can be surmounted, and if so which is the safest. I'm
> thinking that I want to rename the internal HD to something other than the
> default setting anyway, but I really don't like the idea that I might miss
> changing the name in some important file or script that will bite me
> later.
3. Plug the USB HD into any available system with a different/no internal
VG name and rename. Stick a LiveCD into one of your LTSP thin clients
for instance.
4. Rename the USB HD using the UUID:
# vgrename -v [VGUUID] newvgname
From the man page:
"vgrename Zvlifi-Ep3t-e0Ng-U42h-o0ye-KHu1-nl7Ns4 VolGroup00_tmp"
changes the name of the Volume Group with UUID
Zvlifi-Ep3t-e0Ng-U42h-o0ye-KHu1-nl7Ns4 to "VolGroup00_tmp".
--
Stuart D. Gathman <stuart@bmsi.com>
Business Management Systems Inc. Phone: 703 591-0911 Fax: 703 591-6154
"Confutatis maledictis, flammis acribus addictis" - background song for
a Microsoft sponsored "Where do you want to go from here?" commercial.
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
