>>>>> "Turbo" == Turbo Fredriksson <turbo@bayour.com> writes:
Turbo> The idea was to re-create sdb as mdX+missing, so I tried
Turbo> pvmove sdb. But instantly received a lot of errors. Now I
Turbo> can't remove it from the VG!
This is the error I'm getting (starts more or directly after LVM
is setup):
[ 370.565512] ata4: command 0x35 timeout, stat 0xd1 host_stat 0x1
[ 370.565707] ata4: translated ATA stat/err 0xd1/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 370.565890] ata4: status=0xd1 { Busy }
[ 370.565929] sd 3:0:0:0: SCSI error: return code = 0x8000002
[ 370.565937] sdc: Current: sense key: Aborted Command
[ 370.565943] Additional sense: Scsi parity error
[ 370.565967] end_request: I/O error, dev sdc, sector 12491199
The 'Scsi parity error' (from what I knew) is usually/most likley
due to faulty/insufficient PSU. I _should_ probably try to strap
the new PSU to the desktop just to make sure, but... ?
--
bomb 767 PLO Uzi Ortega ammunition Soviet FSF radar NORAD pits colonel
Delta Force killed genetic
[See http://www.aclu.org/echelonwatch/index.html for more about this]
[Or http://www.europarl.eu.int/tempcom/echelon/pdf/rapport_echelon_en.pdf]
If neither of these works, try http://www.aclu.org and search for echelon.
Note. This is a real, not fiction.
http://www.theregister.co.uk/2001/09/06/eu_releases_echelon_spying_report/
http://www.aclu.org/safefree/nsaspying/23989res20060131.html#echelon
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
