On 5/10/07, Alex Owen <r.alex.owen@gmail.com> wrote:
Hello, I have just been making some snapshot performance benchmarks on a Debian Etch system. Kernel: 2.6.18-4-686 (2.6.18.dfsg.1-12etch1) dmsetup: 1.02.08-1 lvm2: 2.02.06-4 I have been using commands of the form: time dd if=/dev/zero of=/dev/volgroup/test bs=1M count=100 to get speeds for copying to a LVM device both WITH and WITHOUT a single snapshot. It seems that writes take >=10 times longer the first time a newly snapshot origin device is written to. I was expecting somthing like a 2x or 3x performance loss as 1 physical read and 2 physical writes must occur for a single logical write. I was NOT expecting there to be a 10x overhead. As I move to larger devices (bs=1M count=1000) the 10x figure rises to nearer 20x. This is also true on mounted origin LV's. Has anyone else benchmarked this? Is this normal? Thanks for any feedback Alex Owen
I always ensure my snapshots are on physically separate drives than my origin. If they are on the same drive I'm not surprised you're having speed issues. You are significantly increasing the amount of disk seek activity. Having in separate drives should be much better. (FYI: It has been a while since I benchmarked, so you may still have problems.) Greg -- Greg Freemyer The Norcross Group Forensics for the 21st Century _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
