Hi,
I know this is a long post, but please take the time to at least
read this paragraph;
Summary: One of my 8 PVs is dead and I despirately need to rescue
the data from the other 7, even if its just read-only is fine, as
long as I can see it.
I don't have a backup, so I know this is my fault. Please have some
sympathy and help me anyway :)
Details:
System:
Gentoo linux:
Linux vaus 2.6.11.10 #2 SMP Mon May 30 02:46:52 GMT 2005 i686 AMD
Athlon(tm) Processor AuthenticAMD GNU/Linux
I have an 8 disk lvm array (linear, non-striped)
The last disk in the array has died completely (head crash)
so i've had to remove it from the system, but now of course,
I can't see any of my volume group.
My 8 PVs make up 1 volume group called vg1, It consists of
1 logical volume, called lv1, which contains ext2.
The lvm array was originally built back when I was using kernel 2.4.18
with LVM1. Now im using LVM2 & device mapper - but I havent changed
anything, It just worked since I rebuilt the system.
The dead disk was the last one added to the array and contains nothing,
I noticed it went wrong when I heard a loud clicking noise from the 8th
PV when copying a file onto the vg that took it over the boundary to
the 8th PV.
I'm absolutely despirate, so I'm really hoping there is a way to at
least see the data on the 7 remaining PVs. All the disks are 100% ok
and it's not striped so the data should be intact.
I've trawled the web and found 2 possible solutions:
*1: Do a partial read only mount of the VG.
This did not work - see below...
vaus root # vgchange -P -a y vg1
Partial mode. Incomplete volume groups will be activated read-only.
7 PV(s) found for VG vg1: expected 8
Logical volume (lv1) contains an incomplete mapping table.
7 PV(s) found for VG vg1: expected 8
Logical volume (lv1) contains an incomplete mapping table.
1 logical volume(s) in volume group "vg1" now active
vaus root # ls -l /dev/mapper/
total 0
crw-rw---- 1 root root 10, 63 May 30 02:48 control
brw------- 1 root root 254, 0 Oct 25 13:20 vg1-lv1
vaus root # mount /dev/mapper/vg1-lv1 /mnt/test/
mount: you must specify the filesystem type
vaus root # mount /dev/mapper/vg1-lv1 /mnt/test/ -t ext2
mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1-lv1,
or too many mounted file systems
(could this be the IDE device where you in fact use
ide-scsi so that sr0 or sda or so is needed?)
Something seems to be wrong with the vg1-lv1 block device,
any ideas?
*2: Put a new disk in and write the uuid of the dead disk onto it.
The problem here is I can't find anyway of getting the old UUID.
I've grepped all the logs in /var/log and /etc/lvm and cant find anything.
Interestingly the backup stuff just shows 7 PVs too, I think it's only
backing up the last reboot.
Anyway, I heard that doing:
pvdata -U
Will retrieve the UUIDs of all the PVs from anyt working drive, but it's
an LVM1 command, and now i'm running 2.6 with LVM2/device mapper and
I cannot build the lvm tools (at least i dont seem to be able to).
Is there any way I can get this info without building an LVM1 system?
It was built on LVM1, the UUIDs must be stored on each drive.
Thanks in advance for any help,
I know this is my problem, but when I lost this data my world colapsed!
I would be very appreciative of any information.
Below are some outputs of various commands. If you need any more
information I would be happy to give it.
Any suggestions I can try out right away and get back to you.
Kind regards,
Tom Robinson
vaus root # pvscan
7 PV(s) found for VG vg1: expected 8
Logical volume (lv1) contains an incomplete mapping table.
PV /dev/hda VG vg1 lvm1 [233.72 GB / 0 free]
PV /dev/hdc VG vg1 lvm1 [233.72 GB / 0 free]
PV /dev/cdrom VG vg1 lvm1 [152.62 GB / 0 free]
PV /dev/hde4 VG vg1 lvm1 [109.56 GB / 0 free]
PV /dev/hdb VG vg1 lvm1 [233.72 GB / 0 free]
PV /dev/hdf VG vg1 lvm1 [114.44 GB / 0 free]
PV /dev/hdh VG vg1 lvm1 [233.72 GB / 0 free]
Total: 7 [1.28 TB] / in use: 7 [1.28 TB] / in no VG: 0 [0 ]
* The dead disk was a 250G - all disks are maxtors,
normal size of VG is 1.51TB (1690 hard disk gigs)
vaus root # vgchange -a y vg1
7 PV(s) found for VG vg1: expected 8
7 PV(s) found for VG vg1: expected 8
Unable to find volume group "vg1"
vaus root # vgdisplay -v
Finding all volume groups
Finding volume group "vg1"
Wiping cache of LVM-capable devices
7 PV(s) found for VG vg1: expected 8
7 PV(s) found for VG vg1: expected 8
Volume group "vg1" doesn't exist
vaus root # pvdisplay -v
Scanning for physical volume names
Wiping cache of LVM-capable devices
7 PV(s) found for VG vg1: expected 8
Logical volume (lv1) contains an incomplete mapping table.
--- Physical volume ---
PV Name /dev/hda
VG Name vg1
PV Size 233.76 GB / not usable 44.44 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 7479
Free PE 0
Allocated PE 7479
PV UUID ofE07R-sevF-QJp0-xJ2k-Ga3z-fkIW-SDsS3F
--- Physical volume ---
PV Name /dev/hdc
VG Name vg1
PV Size 233.76 GB / not usable 44.44 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 7479
Free PE 0
Allocated PE 7479
PV UUID K8CRuK-5ybE-1GPS-qxXY-cybH-asIa-KKkZmt
--- Physical volume ---
PV Name /dev/cdrom
VG Name vg1
PV Size 152.67 GB / not usable 46.50 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 4884
Free PE 0
Allocated PE 4884
PV UUID sKlDWY-DYK1-44tN-dfVU-qoaF-BKmX-wI3cAV
--- Physical volume ---
PV Name /dev/hde4
VG Name vg1
PV Size 109.61 GB / not usable 51.21 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 3506
Free PE 0
Allocated PE 3506
PV UUID efBrIF-U1AF-WeWs-7CCC-hQqg-JGh3-fT7IQt
--- Physical volume ---
PV Name /dev/hdb
VG Name vg1
PV Size 233.76 GB / not usable 44.44 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 7479
Free PE 0
Allocated PE 7479
PV UUID iG7W2l-oHuD-0VNl-L68d-aE9M-VSC1-oWnZM9
--- Physical volume ---
PV Name /dev/hdf
VG Name vg1
PV Size 114.50 GB / not usable 62.94 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 3662
Free PE 0
Allocated PE 3662
PV UUID 16cN09-WSFr-B6nx-ybol-GlfM-07jY-5cRcfx
--- Physical volume ---
PV Name /dev/hdh
VG Name vg1
PV Size 233.76 GB / not usable 44.44 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 7479
Free PE 0
Allocated PE 7479
PV UUID lHJQbC-9wQv-ZAC9-w95D-dlE9-ITa7-QK6KrN
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
