Hi Luca
I tried your idea:
grep cdrom /etc/lvm/lvm.conf
filter = [ "r|/dev/hdb|", "r|/dev/hdc|", "r|/dev/cdrom|" ]
vgscan -v -v 2>&1 | grep cdrom
/dev/cdrom1: size is 31244 sectors
/dev/cdrom1: read failed after 0 of 2048 at 0: Input/output error
/dev/cdrom1: size is 31244 sectors
/dev/cdrom1: No label detected
/dev/cdrom: size is 4 sectors
Regards,
Chris
On Sun, Aug 28, 2005 at 08:36:14PM +0200, Luca Berra wrote:
> On Sun, Aug 28, 2005 at 01:56:18PM +0200, Chris Osicki wrote:
> >OK, that are my filters now:
> >
> > filter = [ "r|/dev/hdb|" ]
> > filter = [ "r|/dev/hdc|" ]
> > filter = [ "r|/dev/cdrom|" ]
> > filter = [ "r|/dev/cdrom1|" ]
> > filter = [ "r|/dev/cdrom*|" ]
> > filter = [ "r|/dev/cdrom.*|" ]
> >
> i tought the syntax was:
> filter = [ "r|/dev/hdb|", "r|/dev/hdc|", "r|/dev/cdrom|" ]
>
> you should not need the last 3, since "r|/dev/cdrom|" being a regexp
> matches all of them.
>
>
> btw, i believed "sysfs_scan = 1" was enough to skip cdroms
>
> L.
>
>
>
>
> --
> Luca Berra -- bluca@comedia.it
> Communication Media & Services S.r.l.
> /"\
> \ / ASCII RIBBON CAMPAIGN
> X AGAINST HTML MAIL
> / \
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
--
Chris Osicki osk@osk.ch
Dipl. Informatik-Ing. HTL
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
