On 6/13/05, Steven Law <cwinl-linux-lvm@lnnu.edu.cn> wrote: > > -----Original Message----- > > From: linux-lvm-bounces@redhat.com > > [mailto:linux-lvm-bounces@redhat.com] On Behalf Of Garrick Staples > > Sent: Monday, June 13, 2005 1:14 PM > > To: LVM general discussion and development > > Subject: Re: how to move data from one PV to > > other PV automaticly? > > > > On Mon, Jun 13, 2005 at 10:51:58AM +0800, cwinl alleged: > > > hi,all: > > > i have a VG with 3 PV. > > > here is 'pvdisplay' information: > > > --- Physical volume --- > > > PV Name /dev/sdb1 > > > Free PE 0 > > > > > > --- Physical volume --- > > > PV Name /dev/sdc1 > > > Free PE 0 > > > > > > --- Physical volume --- > > > PV Name /dev/sdd1 > > > Free PE 0 > > > > > > i want to move all data from /dev/sdb1 to another two PV (/dev/sdc1 > > > and > > > /dev/sdd1) automaticly. > > > so i can remove the unstable PV /dev/sdb1 and repair it. > > > then i will restore a new /dev/sdb1 device. > > > /dev/mapper/nicvg-niclv > > > 2.0T 774G 1.2T 40% /ftproot > > > > > > --------------------------------- > > > > > > the volumn '/dev/mapper/nicvg-niclv' is on the VG above. > > > > > > how can finish it? > > > > > > any suggestion is regarded! > > > > The other 2 PVs (sdc1 and sdd1) are both full. You can't > > move any data on them with the current configuration. You'll > > need to free up ~840GB on nicvg before you can do it. > > > > The first step would be to shrink the filesystem using the > > correct utility for the filesystem (you didn't mention the > > filesystem type). Fortunately you have 1.2TB free on the > > my FS is reiserfs. > please tell me in detail. man resize_reiserfs, then use (c)fdisk to reduce the partition. ~David _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
