Robert, You need to change one of the top most levels (filesystem). Read this next part from the bottom up (Everyone: if I have something here wrong, let me know) Highest Level: File System layer (files & directories) LVM LV Layer (logical volumes) LVM PV layer (physical volumes) Partition table (special data on the hard disk) LBA translation (in disk controller or drive circutry) Lowest Level: Physical Hard disk (platter that spins & r/w heads) OK, so like it sounds like you've added more space to the LVM PV layer. So like you need to add it to the LVM LV layer, and then you need to change the file system size to take advantage of the increased LVM LV space that you've added. Clear as mud, right? On Fri, March 4, 2005 13:40, Erik Ohrnberger said: > Robert, > When you say type 8e, it makes me think of the partition table, not > the filesystem, which would be etx2 or etx3 or XFS or Reiserfs or .... > > Now when a partition is marked as type 8e, it is an LVM partition. > > Best of luck, > Erik. > > On Fri, March 4, 2005 13:35, Robert Buick said: >> I'm using type 8e, does anyone happen to know if resize2fs is >> appropriate for this type; the man page only mentions type2. >> >> >> On Thu, 2005-03-03 at 21:47 +0000, Robin Green wrote: >>> On Thu, Mar 03, 2005 at 09:35:55PM +0000, Robert Buick wrote: >>> > I'm running Fedora Core 3 with LVM2, and have added /dev/hda4 >>> (13.09GB) >>> > to the VG, however this increase is not reflected if I do a df -h. >>> Have >>> > I missed something? >>> > >>> >[root@stemme mapper]# lvscan >>> > ACTIVE '/dev/VolGroup00/LogVol00' [34.53 GB] inherit >>> > ACTIVE '/dev/VolGroup00/LogVol01' [1.94 GB] inherit >>> > [root@stemme mapper]# pvscan >>> > PV /dev/hda2 VG VolGroup00 lvm2 [23.41 GB / 32.00 MB free] >>> > PV /dev/hda4 VG VolGroup00 lvm2 [13.09 GB / 0 free] >>> > Total: 2 [36.50 GB] / in use: 2 [36.50 GB] / in no VG: 0 [0 ] >>> > [root@stemme mapper]# vgscan >>> > Reading all physical volumes. This may take a while... >>> > Found volume group "VolGroup00" using metadata type lvm2 >>> > [root@stemme mapper]# df -h >>> > Filesystem Size Used Avail Use% Mounted on >>> > /dev/mapper/VolGroup00-LogVol00 >>> > 22G 9.0G 12G 45% / >>> > /dev/hda1 99M 22M 73M 23% /boot >>> > none 760M 0 760M 0% /dev/shm >> >>> Yes - you need to resize the filesystem as well. >>> >>> If you are using an ext2 or ext3 filesystem you could use resize2fs. If >>> you >>> are using reiserfs, you could use resize_reiserfs. I don't know about >>> resize >>> tools for other filesystems. >>> >>> Please note that resize2fs in Fedora Core 3 is buggy, and may corrupt >>> the >>> resize inode. To get a version that works better, I recommend you >>> download and build >>> from source e2fsprogs 1.36 from >>> http://prdownloads.sourceforge.net/e2fsprogs/e2fsprogs-1.36.tar.gz >>> >>> (If you wanted to avoid using resize2fs altogether, you could of course >>> backup all your data in /, mke2fs the root filesystem, and copy all the >>> data >>> back again. But that would be much slower.) >> >> >> >> _______________________________________________ >> linux-lvm mailing list >> linux-lvm@redhat.com >> https://www.redhat.com/mailman/listinfo/linux-lvm >> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ >> > > > _______________________________________________ > linux-lvm mailing list > linux-lvm@redhat.com > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ > _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/