Paul Pianta <pantz@lqt.ca> wrote at Wed, Feb 23, 2005 at 04:43:41PM -0500: > Hi people > > I have a gentoo live cd (with lvm support) and I assume this is what I > need to use to > 1. create the volume group vgRoot > 2. create the three logical volumes lvUsr, lvHome, lvVar > 3. copy /usr, /home, /var from /dev/md1 over to these newly created > logical volumes > 4. edit /etc/fstab to reflect the new partition layout > 5. reboot and dance around the room with my pants down singing 'oh what > a beautiful morning' > Paul, The url below is what i used and it runs perfectly. http://gentoo-wiki.com/HOWTO_Gentoo_Install_on_Software_RAID_mirror_and_LVM2_on_top_of_RAID I have a 4x250Gb machine with disk 0 and 3 as raid pair. My fstab looks like this: /dev/md0 /boot ext3 noauto,noatime 1 1 /dev/md2 / reiserfs noatime 0 0 /dev/md1 none swap sw 0 0 /dev/vg/usr /usr reiserfs noatime 0 0 /dev/vg/var /var reiserfs noatime 0 0 /dev/vg/tmp /tmp reiserfs noatime 0 0 /dev/vg/opt /opt reiserfs noatime 0 0 /dev/vg/home /home reiserfs noatime 0 0 have a look at the URL > thanks > > pantz > > _______________________________________________ > linux-lvm mailing list > linux-lvm@redhat.com > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ --- End of pantz@lqt.ca's quote --- cheers, -- Fred Buzzwords are like annoying little flies that deserve to be swatted _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/