Ahh. Okay, here's my config files:
/etc/raidtab:
----------------------------------
raiddev /dev/md1
raid-level 1
nr-raid-disks 2
chunk-size 256
persistent-superblock 1
nr-spare-disks 1
device /dev/sda3
raid-disk 0
device /dev/sdb3
raid-disk 1
device /dev/sdc3
spare-disk 0
raiddev /dev/md0
raid-level 1
nr-raid-disks 2
chunk-size 256
persistent-superblock 1
nr-spare-disks 1
device /dev/sda1
raid-disk 0
device /dev/sdb1
raid-disk 1
device /dev/sdc1
spare-disk 0
----------------------------------
/etc/fstab:
------------------------------------
/dev/rootvg/LogVol00 / ext3 defaults 1 1
/dev/md0 /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
/dev/sdc2 swap swap defaults 0 0
/dev/sdb2 swap swap defaults 0 0
/dev/sda2 swap swap defaults 0 0
/dev/cdrom /mnt/cdrom udf,iso9660
noauto,owner,kudzu,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0
0
----------------------------------------------------------------------------
-
vgscan says:
--------------------------------------------------
Logging initialised at Tue Jul 27 19:32:00 2004
Set umask to 0077
vgscan Wiping cache of LVM-capable devices
vgscan Wiping internal cache
vgscan Reading all physical volumes. This may take a while...
vgscan Finding all volume groups
vgscan Finding volume group "vg00"
vgscan Read size too large: 3191341056
vgscan Failed to read extents from /dev/sdb
vgscan Read size too large: 3191341056
vgscan Failed to read extents from /dev/sdb
vgscan Read size too large: 3191341056
vgscan Failed to read extents from /dev/sdc
vgscan Volume group "vg00" not found
vgscan Finding volume group "rootvg"
vgscan Found volume group "rootvg" using metadata type lvm2
----------------------------------------------------------------
Anything else I should be posting? BTW, are you here in Raleigh?
Thanks!
Zack
----- Original Message -----
From: "Patrick Caulfield" <pcaulfie@redhat.com>
To: "LVM general discussion and development" <linux-lvm@redhat.com>
Sent: Tuesday, July 27, 2004 3:18 AM
Subject: Re: LVM2 and RAID 1 not working on Fedora Core 2
> On Mon, Jul 26, 2004 at 06:56:04PM -0400, Zachary Hamm wrote:
> >
> > Changed the filter directed as suggested, no joy. I still get the same
> > errors. Any other suggestions, or should I post more config
information?
> > There has to be something I'm missing.
> >
>
> Can you tell me which drives are making up the MD devices and which (if
any)
> are to be used by LVM directly?
>
> Its possible that it's just the filter that needs more work. maybe
something
> like:
>
> filter = [ "a/md.*/", "r/.*/" ]
> --
>
> patrick
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
>
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
