On Sun, Dec 21, 2003 at 12:41:34AM +0100, Sebastian Witt wrote:
Ignoring duplicate PV on /dev/hdg1 Found /dev/hdf1 in VG raid_vg Ignoring duplicate PV on /dev/hdf1 Found /dev/hdh1 in VG raid_vg
Set up a filter in lvm.conf so that LVM2 only sees the RAID devices and ignores the constituent devices that make up the RAID devices.
The LVM2 logic isn't clever enough yet always to work out the correct device to use. This will get fixed.
Sorry, RAID is a little bit wrong in my case. The harddiscs running on
a Promise RAID-Controller but the RAID-function is disabled and it's used as a normal IDE controller.
I appended my configuration.
I've also this problem if I use this filter: filter = [ "a/hd[e-h]1$/", "r/.*/" ]
Regards, Sebastian
--- Volume group --- VG Name raid_vg VG Access read/write VG Status available/resizable VG # 0 MAX LV 256 Cur LV 2 Open LV 2 MAX LV Size 255.99 GB Max PV 256 Cur PV 4 Act PV 4 VG Size 38.15 GB PE Size 4 MB Total PE 9766 Alloc PE / Size 9760 / 38.12 GB Free PE / Size 6 / 24 MB VG UUID none --- Logical volume --- LV Name /dev/raid_vg/ftp_lv VG Name raid_vg LV Write Access read/write LV Status available LV # 1 # open 1 LV Size 25 GB Current LE 6400 Allocated LE 6400 Stripes 4 Stripe size (KByte) 64 Allocation next free Read ahead sectors 1024 Block device 58:0 --- Logical volume --- LV Name /dev/raid_vg/raid_lv VG Name raid_vg LV Write Access read/write LV Status available LV # 2 # open 1 LV Size 13.12 GB Current LE 3360 Allocated LE 3360 Stripes 4 Stripe size (KByte) 64 Allocation next free Read ahead sectors 1024 Block device 58:1 --- Physical volumes --- PV Name (#) /dev/hde1 (1) PV Status available / allocatable Total PE / Free PE 2440 / 0 PV Name (#) /dev/hdf1 (2) PV Status available / allocatable Total PE / Free PE 2442 / 2 PV Name (#) /dev/hdg1 (3) PV Status available / allocatable Total PE / Free PE 2442 / 2 PV Name (#) /dev/hdh1 (4) PV Status available / allocatable Total PE / Free PE 2442 / 2
