Re: LVM inaccessible after OS reinstall

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



uhm,
either there is a problem with the driver for your sata controller, or
your hdj is hosed.
could you test if you can read all of the disks with dd (keeping an eye
on syslog/dmesg)?

Regards,
L.

On Tue, Nov 04, 2003 at 11:06:32AM +0900, Karl Stenerud wrote:
Sorry if that wasn't useful enough. I'm not an expert on these commands and the faq didn't seem to offer much assistance in this area.

[root@localhost etc]# vgchange -a y
vgchange -- volume group "group1" already active

[root@localhost etc]# vgdisplay -v
--- Volume group ---
VG Name               group1
VG Access             read/write
VG Status             available/resizable
VG #                  0
MAX LV                256
Cur LV                1
Open LV               0
MAX LV Size           2 TB
Max PV                256
Cur PV                4
Act PV                4
VG Size               465.75 GB
PE Size               32 MB
Total PE              14904
Alloc PE / Size       14904 / 465.75 GB
Free  PE / Size       0 / 0
VG UUID               QnY93d-dypP-OLTs-5122-BVT4-4Zjk-wGY7rC

--- Logical volume ---
LV Name                /dev/group1/vol1
VG Name                group1
LV Write Access        read/write
LV Status              available
LV #                   1
# open                 0
LV Size                465.75 GB
Current LE             14904
Allocated LE           14904
Allocation             next free
Read ahead sectors     1024
Block device           58:0


--- Physical volumes --- PV Name (#) /dev/ide/host4/bus1/target0/lun0/disc (3) PV Status available / allocatable Total PE / Free PE 2383 / 0

PV Name (#)           /dev/ide/host4/bus0/target0/lun0/disc (4)
PV Status             available / allocatable
Total PE / Free PE    2985 / 0

PV Name (#)           /dev/ide/host4/bus0/target1/lun0/disc (2)
PV Status             available / allocatable
Total PE / Free PE    4768 / 0

PV Name (#)           /dev/ide/host2/bus0/target0/lun0/disc (1)
PV Status             available / allocatable
Total PE / Free PE    4768 / 0



[root@localhost etc]#



Here's part of syslog that shows something with reiserfs:

Nov 3 08:04:55 localhost kernel: reiserfs: found format "3.6" with standard journal
Nov 3 08:04:59 localhost kernel: reiserfs: using ordered data mode
Nov 3 08:04:59 localhost kernel: reiserfs: checking transaction log (device ide0(3,3)) ...
Nov 3 08:04:59 localhost kernel: for (ide0(3,3))
Nov 3 08:05:00 localhost kernel: ide0(3,3):Using r5 hash to sort names
Nov 3 08:08:10 localhost kernel: hdj: dma_timer_expiry: dma status == 0x61
Nov 3 08:09:27 localhost kernel: hdj: dma_timer_expiry: dma status == 0x61
Nov 3 08:12:43 localhost kernel: hdj: dma_timer_expiry: dma status == 0x61
Nov 3 08:16:18 localhost last message repeated 2 times
Nov 3 08:17:51 localhost kernel: hdj: dma_timer_expiry: dma status == 0x61
Nov 3 08:18:01 localhost kernel: hdj: error waiting for DMA
Nov 3 08:18:01 localhost kernel: hdj: dma timeout retry: status=0xd1 { Busy }
Nov 3 08:18:01 localhost kernel:
Nov 3 08:18:01 localhost kernel: hdi: DMA disabled
Nov 3 08:18:01 localhost kernel: hdj: DMA disabled
Nov 3 08:18:01 localhost kernel: ide4: reset: success
Nov 3 08:18:09 localhost kernel: blk: queue c0181fac, I/O limit 4095Mb (mask 0xffffffff)
Nov 3 08:18:16 localhost kernel: hdj: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
Nov 3 08:18:16 localhost kernel: hdj: read_intr: error=0x40 { UncorrectableError }, LBAsect=103350672, high=6, low=2687376, sector=103350672
Nov 3 08:18:16 localhost kernel: end_request: I/O error, cmd 0 dev 38:40 (hdj), sector 103350672
Nov 3 08:18:20 localhost kernel: hdj: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Nov 3 08:18:20 localhost kernel: hdj: dma_intr: error=0x40 { UncorrectableError }, LBAsect=103350676, high=6, low=2687380, sector=103350674
Nov 3 08:18:20 localhost kernel: end_request: I/O error, cmd 0 dev 38:40 (hdj), sector 103350674
Nov 3 08:18:24 localhost kernel: hdj: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Nov 3 08:18:24 localhost kernel: hdj: dma_intr: error=0x40 { UncorrectableError }, LBAsect=103350676, high=6, low=2687380, sector=103350676
Nov 3 08:18:24 localhost kernel: end_request: I/O error, cmd 0 dev 38:40 (hdj), sector 103350676
Nov 3 08:18:54 localhost kernel: hdj: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Nov 3 08:18:54 localhost kernel: hdj: dma_intr: error=0x40 { UncorrectableError }, LBAsect=108855680, high=6, low=8192384, sector=108855680
Nov 3 08:18:54 localhost kernel: end_request: I/O error, cmd 0 dev 38:40 (hdj), sector 108855680 low=8192384, sector=108855680
Nov 3 08:18:54 localhost kernel: end_request: I/O error, cmd 0 dev 38:40 (hdj), sector 108855680
Nov 3 09:01:00 localhost CROND[2241]: (root) CMD (nice -n 19 run-parts /etc/cron.hourly)
Nov 3 09:17:57 localhost kernel: hdj: dma_timer_expiry: dma status == 0x41
Nov 3 09:18:04 localhost proftpd[2258]: localhost (main.internal[192.168.10.10]) - FTP session opened.
Nov 3 09:18:53 localhost kernel: hdj: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Nov 3 09:18:53 localhost kernel: hdj: dma_intr: error=0x40 { UncorrectableError }, LBAsect=40960394, high=2,low=7405962, sector=40960384
Nov 3 09:18:53 localhost kernel: end_request: I/O error, cmd 0 dev 38:40 (hdj), sector 40960384



-- Luca Berra -- bluca@comedia.it Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \

_______________________________________________
linux-lvm mailing list
linux-lvm@sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

[Index of Archives]     [Gluster Users]     [Kernel Development]     [Linux Clusters]     [Device Mapper]     [Security]     [Bugtraq]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]

  Powered by Linux