Alle 10:37, mercoledì 24 settembre 2003, Heinz J . Mauelshagen ha scritto: > Gingia, > > the normal procedure is "vgscan ; vgchange -ay ; mount -a" > rather than vgcfgrestore before vgchange. ... > Have you tried "vgscan ; vgchange -ay ; mount -a" before ? > (keep in mind, that vgscan needs space below /etc/ to store metadata > copies) I controlled the script of bootstrap to see if there is the apropiated entry, and it seems is ok, i also re-started the server . I tried "vgscan" and i have the output: invalidate :dirty buffer invalidate :busy buffer (any time) vgscan -- "/etc/lvmtab" and "7etc/lvmtab.d" successfully created vgscan -- WARNING: this programm doe not do a VGDA backup of your group after i do : vgchange -ay and the output was: vgchange -- no volume group found so i made the restore: vgcfgrestore ......... the ouptput was vgcfgrestore -- VGDA for "Volume1" successfully restored to phisical volume "/dev/i2o/hda3" vgcfgrestore -- you may not have an actual backup of restored group "volume1" then i can do vgchange -ay and go on This is all , was it the matter? Thank you _______________________________________________ linux-lvm mailing list linux-lvm@sistina.com http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
