On Wed, Sep 10, 2003 at 03:04:25PM +0200, Markus Baertschi wrote:
For reasons too complicate to explain here our SAN configuration is
broken. The effect is that linux sees the san disks twice. The originally
However, does LVM handles this situation (disks visible twice) nicely ?
does not seem broken to me if you have two hba.
lvm does not support multipath
or should I continue to use my workaround (pull a fiber) to make sure
the disks are visible only once ?
it is not a nice workaround.
- Are there risks of corruption ?
i don't think so.
- What happens if the path the LVM happens to use breaks, but the other
is still up. Will LVM handle fail-over ?
lvm does not support multipath
at the moment your best chance is setting up an md multipath
and building your lvm over the md devices. be sure to use mdadm instead
of raidtools to manage the md.
i have this setup (2 hbas to same storage with lvm over md multipath) in
production, and it works fine.
another option could be if your hba driver handles multipath. i know
some qlogic boards do.
regards,
L.
--
Luca Berra -- bluca@comedia.it
Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL
/ \
_______________________________________________
linux-lvm mailing list
linux-lvm@sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
