On Wed, Apr 30 '03 at 10:42, Ewen McNeill wrote:
> [ ... ] Is that for the 3Ware 7000-2 card, which appears to be
> a 2-drive (single IDE channel?), [ ... ]
most likely for the 7000-2 card, what can only do raid0/1 and threfor
lakes the expensive raid5 engine. still i use it happily
> >Obviously, LVM and MD should still work together regardless.
> FWIW, my problem is with LVM and ata-raid [ ... ]
> Perhaps making LVM and ataraid work together properly is "too hard"
> [ ... ]
> But IMHO either LVM and ataraid should work properly, or it should be
> really really obvious that they won't work together
during my last/first/only time i had to deal with ataraid, and IIRC,
the promise IDE driver had a compile time flag where it would not touch
initialised raid arrays.
aktivating this flag would simply remove the offending disks from the
list of ide disks and make it available via ataraid only.
OTOH I might have had a too long day and my memory is all wrong.
lukily I don't have to deal with this box any more ;-) and therefor can
not check this.
--
Goetz Bock (c) 2003 as blacknet.de - Munich - Germany /"\
IT Consultant GNU FDL 1.1 secure mobile Linux everNETting \ /
X
ASCII Ribbon Campaign against HTML email & microsoft attachments / \
_______________________________________________
linux-lvm mailing list
linux-lvm@sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
