Anthony, with which Linux+LVM version does this happen (recent one from www.sistina.com is recommended)? Did you patch your kernel with LVM as discribed in INSTALL and PATCHES/README in the LVM source distribution? Does it happen with or without devfs? On Mon, Oct 15, 2001 at 08:34:46AM -0700, Anthony Johnson wrote: > Sorry to repeat, but I've had no response and am dead in the water. Anyone > had a similar problem or have advice on how to reolve this? > > # lvcreate -d -l1 -n testlv1 uservg > ... > <1> lv_create_node -- LEAVING with ret: 0 > <1> lvm_error -- CALLED with: 6 > <1> lvm_error -- LEAVING with: "No such device or address" > lvcreate -- ERROR "No such device or address" opening "/dev/uservg/testlv1" > > After running this command, the node /dev/uservg/testlv1 was created in the > directory but vgdisplay -v still shows there are no LVs in uservg. Tried > this on different VGs, using different PE sizes, lvnames, etc with same results. > > _______________________________________________ > linux-lvm mailing list > linux-lvm@sistina.com > http://lists.sistina.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html -- Regards, Heinz -- The LVM Guy -- *** Software bugs are stupid. Nevertheless it needs not so stupid people to solve them *** =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Sistina Software Inc. Senior Consultant/Developer Am Sonnenhang 11 56242 Marienrachdorf Germany Mauelshagen@Sistina.com +49 2626 141200 FAX 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
