pwm attributes have well defined names, which should be used.
Cc: Vadim V. Vlasov <vvlasov@xxxxxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
v2: Update documentation as well.
Documentation/hwmon/nct7904 | 4 ++--
drivers/hwmon/nct7904.c | 57 +++++++++++++++++++++++----------------------
2 files changed, 31 insertions(+), 30 deletions(-)
diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904
index 014f112e2a14..57fffe33ebfc 100644
--- a/Documentation/hwmon/nct7904
+++ b/Documentation/hwmon/nct7904
@@ -35,11 +35,11 @@ temp1_input Local temperature (1/1000 degree,
temp[2-9]_input CPU temperatures (1/1000 degree,
0.125 degree resolution)
-fan[1-4]_mode R/W, 0/1 for manual or SmartFan mode
+pwm[1-4]_enable R/W, 1/2 for manual or SmartFan mode
Setting SmartFan mode is supported only if it has been
previously configured by BIOS (or configuration EEPROM)
-fan[1-4]_pwm R/O in SmartFan mode, R/W in manual control mode
+pwm[1-4] R/O in SmartFan mode, R/W in manual control mode
The driver checks sensor control registers and does not export the sensors
that are not enabled. Anyway, a sensor that is enabled may actually be not
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
index b77b82f24480..6153df735e82 100644
--- a/drivers/hwmon/nct7904.c
+++ b/drivers/hwmon/nct7904.c
@@ -412,8 +412,9 @@ static ssize_t show_pwm(struct device *dev,
return sprintf(buf, "%d\n", val);
}
-static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
- const char *buf, size_t count)
+static ssize_t store_enable(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
{
int index = to_sensor_dev_attr(devattr)->index;
struct nct7904_data *data = dev_get_drvdata(dev);
@@ -422,18 +423,18 @@ static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
if (kstrtoul(buf, 10, &val) < 0)
return -EINVAL;
- if (val > 1 || (val && !data->fan_mode[index]))
+ if (val < 1 || val > 2 || (val == 2 && !data->fan_mode[index]))
return -EINVAL;
ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + index,
- val ? data->fan_mode[index] : 0);
+ val == 2 ? data->fan_mode[index] : 0);
return ret ? ret : count;
}
-/* Return 0 for manual mode or 1 for SmartFan mode */
-static ssize_t show_mode(struct device *dev,
- struct device_attribute *devattr, char *buf)
+/* Return 1 for manual mode or 2 for SmartFan mode */
+static ssize_t show_enable(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
int index = to_sensor_dev_attr(devattr)->index;
struct nct7904_data *data = dev_get_drvdata(dev);
@@ -443,36 +444,36 @@ static ssize_t show_mode(struct device *dev,
if (val < 0)
return val;
- return sprintf(buf, "%d\n", val ? 1 : 0);
+ return sprintf(buf, "%d\n", val ? 2 : 1);
}
/* 2 attributes per channel: pwm and mode */
-static SENSOR_DEVICE_ATTR(fan1_pwm, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR,
show_pwm, store_pwm, 0);
-static SENSOR_DEVICE_ATTR(fan1_mode, S_IRUGO | S_IWUSR,
- show_mode, store_mode, 0);
-static SENSOR_DEVICE_ATTR(fan2_pwm, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+ show_enable, store_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
show_pwm, store_pwm, 1);
-static SENSOR_DEVICE_ATTR(fan2_mode, S_IRUGO | S_IWUSR,
- show_mode, store_mode, 1);
-static SENSOR_DEVICE_ATTR(fan3_pwm, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
+ show_enable, store_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR,
show_pwm, store_pwm, 2);
-static SENSOR_DEVICE_ATTR(fan3_mode, S_IRUGO | S_IWUSR,
- show_mode, store_mode, 2);
-static SENSOR_DEVICE_ATTR(fan4_pwm, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
+ show_enable, store_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR,
show_pwm, store_pwm, 3);
-static SENSOR_DEVICE_ATTR(fan4_mode, S_IRUGO | S_IWUSR,
- show_mode, store_mode, 3);
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IRUGO | S_IWUSR,
+ show_enable, store_enable, 3);
static struct attribute *nct7904_fanctl_attrs[] = {
- &sensor_dev_attr_fan1_pwm.dev_attr.attr,
- &sensor_dev_attr_fan1_mode.dev_attr.attr,
- &sensor_dev_attr_fan2_pwm.dev_attr.attr,
- &sensor_dev_attr_fan2_mode.dev_attr.attr,
- &sensor_dev_attr_fan3_pwm.dev_attr.attr,
- &sensor_dev_attr_fan3_mode.dev_attr.attr,
- &sensor_dev_attr_fan4_pwm.dev_attr.attr,
- &sensor_dev_attr_fan4_mode.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm4.dev_attr.attr,
+ &sensor_dev_attr_pwm4_enable.dev_attr.attr,
NULL
};
--
2.1.0
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
