Add f81768d (id 0x1210) currently found on Jetway motherboards.
It has 11 voltages but otherwise needed no special handling
in this driver.
Signed-off-by: George Joseph <george.joseph@xxxxxxxxxxxxx>
---
drivers/hwmon/f71882fg.c | 44 ++++++++++++++++++++++++++++----------------
1 file changed, 28 insertions(+), 16 deletions(-)
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index e4ff21f..4c9ec5c 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -59,6 +59,7 @@
#define SIO_F71889E_ID 0x0909 /* Chipset ID */
#define SIO_F71889A_ID 0x1005 /* Chipset ID */
#define SIO_F8000_ID 0x0581 /* Chipset ID */
+#define SIO_F81768D_ID 0x1210 /* Chipset ID */
#define SIO_F81865_ID 0x0704 /* Chipset ID */
#define SIO_F81866_ID 0x1010 /* Chipset ID */
@@ -107,7 +108,7 @@
#define F71882FG_REG_START 0x01
-#define F71882FG_MAX_INS 10
+#define F71882FG_MAX_INS 11
#define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */
@@ -116,7 +117,7 @@ module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
enum chips { f71808e, f71808a, f71858fg, f71862fg, f71868a, f71869, f71869a,
- f71882fg, f71889fg, f71889ed, f71889a, f8000, f81865f, f81866a};
+ f71882fg, f71889fg, f71889ed, f71889a, f8000, f81768d, f81865f, f81866a};
static const char *const f71882fg_names[] = {
"f71808e",
@@ -131,25 +132,27 @@ static const char *const f71882fg_names[] = {
"f71889ed",
"f71889a",
"f8000",
+ "f81768d",
"f81865f",
"f81866a",
};
static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
- [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1, 0 },
- [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1, 0 },
- [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 },
- [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
- [f71868a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },
- [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
- [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
- [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
- [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
- [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
- [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
- [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 },
- [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 },
- [f81866a] = { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0 },
+ [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1, 0, 0 },
+ [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 },
+ [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71868a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+ [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 },
+ [f81768d] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+ [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0 },
+ [f81866a] = { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 },
};
static const char f71882fg_has_in1_alarm[] = {
@@ -165,6 +168,7 @@ static const char f71882fg_has_in1_alarm[] = {
[f71889ed] = 1,
[f71889a] = 1,
[f8000] = 0,
+ [f81768d] = 1,
[f81865f] = 1,
[f81866a] = 1,
};
@@ -182,6 +186,7 @@ static const char f71882fg_fan_has_beep[] = {
[f71889ed] = 1,
[f71889a] = 1,
[f8000] = 0,
+ [f81768d] = 1,
[f81865f] = 1,
[f81866a] = 1,
};
@@ -199,6 +204,7 @@ static const char f71882fg_nr_fans[] = {
[f71889ed] = 3,
[f71889a] = 3,
[f8000] = 3, /* +1 fan which is monitor only */
+ [f81768d] = 3,
[f81865f] = 2,
[f81866a] = 3,
};
@@ -216,6 +222,7 @@ static const char f71882fg_temp_has_beep[] = {
[f71889ed] = 1,
[f71889a] = 1,
[f8000] = 0,
+ [f81768d] = 1,
[f81865f] = 1,
[f81866a] = 1,
};
@@ -233,6 +240,7 @@ static const char f71882fg_nr_temps[] = {
[f71889ed] = 3,
[f71889a] = 3,
[f8000] = 3,
+ [f81768d] = 3,
[f81865f] = 2,
[f81866a] = 3,
};
@@ -569,6 +577,7 @@ static struct sensor_device_attribute_2 fxxxx_in_attr[] = {
SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
SENSOR_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 0, 9),
+ SENSOR_ATTR_2(in10_input, S_IRUGO, show_in, NULL, 0, 10),
};
/* For models with in1 alarm capability */
@@ -2668,6 +2677,9 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data)
case SIO_F8000_ID:
sio_data->type = f8000;
break;
+ case SIO_F81768D_ID:
+ sio_data->type = f81768d;
+ break;
case SIO_F81865_ID:
sio_data->type = f81865f;
break;
--
2.4.3
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
