Hi Pali, I've just noticed an issue with this patch. See the comment here below. Gabriele On Wednesday 29 April 2015 13:41:26 Pali Rohár wrote: > This patch splits CONFIG_I8K compile option to SENSORS_DELL_SMM and CONFIG_I8K. > Option SENSORS_DELL_SMM is now used to enable compilation of dell-smm-hwmon > driver and old CONFIG_I8K option to enable /proc/i8k interface in driver. > > So this change allows to compile dell-smm-hwmon driver without legacy /proc/i8k > interface which is needed only for old Dell Inspirion models or for userspace > i8kutils package. > > For backward compatibility when CONFIG_I8K is enabled then also SENSORS_DELL_SMM > is enabled and so driver dell-smm-hwmon (with /proc/i8k) is compiled. > > Signed-off-by: Pali Rohár <pali.rohar@xxxxxxxxx> > --- > arch/x86/Kconfig | 25 +++---- > drivers/hwmon/Kconfig | 11 +++ > drivers/hwmon/Makefile | 2 +- > drivers/hwmon/dell-smm-hwmon.c | 150 ++++++++++++++++++++++------------------ > 4 files changed, 106 insertions(+), 82 deletions(-) > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 226d569..7b756b3 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -1055,24 +1055,19 @@ config TOSHIBA > Say N otherwise. > > config I8K > - tristate "Dell laptop support" > + tristate "Dell i8k legacy laptop support" > select HWMON > + select SENSORS_DELL_SMM > ---help--- > - This adds a driver to safely access the System Management Mode > - of the CPU on the Dell Inspiron 8000. The System Management Mode > - is used to read cpu temperature and cooling fan status and to > - control the fans on the I8K portables. > + This option enables legacy /proc/i8k userspace interface in hwmon > + dell-smm-hwmon driver. Character file /proc/i8k reports bios version, > + temperature and allows controlling fan speeds of Dell laptops via > + System Management Mode. For old Dell laptops (like Dell Inspiron 8000) > + it reports also power and hotkey status. For fan speed control is > + needed userspace package i8kutils. > > - This driver has been tested only on the Inspiron 8000 but it may > - also work with other Dell laptops. You can force loading on other > - models by passing the parameter `force=1' to the module. Use at > - your own risk. > - > - For information on utilities to make use of this driver see the > - I8K Linux utilities web site at: > - <http://people.debian.org/~dz/i8k/> > - > - Say Y if you intend to run this kernel on a Dell Inspiron 8000. > + Say Y if you intend to run this kernel on old Dell laptops or want to > + use userspace package i8kutils. > Say N otherwise. > > config X86_REBOOTFIXUPS > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 25d9e72..714f92a 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -371,6 +371,17 @@ config SENSORS_DS1621 > This driver can also be built as a module. If so, the module > will be called ds1621. > > +config SENSORS_DELL_SMM > + tristate "Dell laptop SMM BIOS hwmon driver" > + depends on X86 && DMI > + help > + This hwmon driver adds support for reporting temperature of different > + sensors and controls the fans on Dell laptops via System Management > + Mode provided by Dell BIOS. > + > + When option I8K is also enabled this driver provides legacy /proc/i8k > + userspace interface for i8kutils package. > + > config SENSORS_DA9052_ADC > tristate "Dialog DA9052/DA9053 ADC" > depends on PMIC_DA9052 > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 51533ac..6cacd0f 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -49,6 +49,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o > obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o > obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o > obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o > +obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o > obj-$(CONFIG_SENSORS_DME1737) += dme1737.o > obj-$(CONFIG_SENSORS_DS620) += ds620.o > obj-$(CONFIG_SENSORS_DS1621) += ds1621.o > @@ -156,7 +157,6 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o > obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o > obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o > obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o > -obj-$(CONFIG_I8K) += dell-smm-hwmon.o > > obj-$(CONFIG_PMBUS) += pmbus/ > > diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c > index 65d314b..2a80882 100644 > --- a/drivers/hwmon/dell-smm-hwmon.c > +++ b/drivers/hwmon/dell-smm-hwmon.c > @@ -81,7 +81,7 @@ static uint i8k_fan_max = I8K_FAN_HIGH; > > MODULE_AUTHOR("Massimo Dal Zotto (dz@xxxxxxxxxx)"); > MODULE_AUTHOR("Pali Rohár <pali.rohar@xxxxxxxxx>"); > -MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops"); > +MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver"); > MODULE_LICENSE("GPL"); > MODULE_ALIAS("i8k"); > > @@ -93,6 +93,7 @@ static bool ignore_dmi; > module_param(ignore_dmi, bool, 0); > MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); > > +#if IS_ENABLED(CONFIG_I8K) > static bool restricted; > module_param(restricted, bool, 0); > MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set"); > @@ -100,6 +101,7 @@ MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set"); > static bool power_status; > module_param(power_status, bool, 0600); > MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k"); > +#endif > > static uint fan_mult; > module_param(fan_mult, uint, 0); > @@ -109,18 +111,6 @@ static uint fan_max; > module_param(fan_max, uint, 0); > MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)"); > > -static int i8k_open_fs(struct inode *inode, struct file *file); > -static long i8k_ioctl(struct file *, unsigned int, unsigned long); > - > -static const struct file_operations i8k_fops = { > - .owner = THIS_MODULE, > - .open = i8k_open_fs, > - .read = seq_read, > - .llseek = seq_lseek, > - .release = single_release, > - .unlocked_ioctl = i8k_ioctl, > -}; > - > struct smm_regs { > unsigned int eax; > unsigned int ebx __packed; > @@ -221,45 +211,6 @@ out: > } > > /* > - * Read the Fn key status. > - */ > -static int i8k_get_fn_status(void) > -{ > - struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, }; > - int rc; > - > - rc = i8k_smm(®s); > - if (rc < 0) > - return rc; > - > - switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) { > - case I8K_FN_UP: > - return I8K_VOL_UP; > - case I8K_FN_DOWN: > - return I8K_VOL_DOWN; > - case I8K_FN_MUTE: > - return I8K_VOL_MUTE; > - default: > - return 0; > - } > -} > - > -/* > - * Read the power status. > - */ > -static int i8k_get_power_status(void) > -{ > - struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, }; > - int rc; > - > - rc = i8k_smm(®s); > - if (rc < 0) > - return rc; > - > - return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY; > -} > - > -/* > * Read the fan status. > */ > static int i8k_get_fan_status(int fan) > @@ -378,6 +329,51 @@ static int i8k_get_dell_signature(int req_fn) > return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1; > } > > +#if IS_ENABLED(CONFIG_I8K) > + > +/* > + * Read the Fn key status. > + */ > +static int i8k_get_fn_status(void) > +{ > + struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, }; > + int rc; > + > + rc = i8k_smm(®s); > + if (rc < 0) > + return rc; > + > + switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) { > + case I8K_FN_UP: > + return I8K_VOL_UP; > + case I8K_FN_DOWN: > + return I8K_VOL_DOWN; > + case I8K_FN_MUTE: > + return I8K_VOL_MUTE; > + default: > + return 0; > + } > +} > + > +/* > + * Read the power status. > + */ > +static int i8k_get_power_status(void) > +{ > + struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, }; > + int rc; > + > + rc = i8k_smm(®s); > + if (rc < 0) > + return rc; > + > + return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY; > +} > + > +/* > + * Procfs interface > + */ > + > static int > i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg) > { > @@ -528,6 +524,37 @@ static int i8k_open_fs(struct inode *inode, struct file *file) > return single_open(file, i8k_proc_show, NULL); > } > > +static const struct file_operations i8k_fops = { > + .owner = THIS_MODULE, > + .open = i8k_open_fs, > + .read = seq_read, > + .llseek = seq_lseek, > + .release = single_release, > + .unlocked_ioctl = i8k_ioctl, > +}; > + > +static void __init i8k_init_procfs(void) > +{ > + /* Register the proc entry */ > + proc_create("i8k", 0, NULL, &i8k_fops); > +} > + > +static void __exit i8k_exit_procfs(void) > +{ > + remove_proc_entry("i8k", NULL); > +} > + > +#else > + > +static inline void __init i8k_init_procfs(void) > +{ > +} > + > +static inline void __exit i8k_exit_procfs(void) > +{ > +} > + > +#endif > > /* > * Hwmon interface > @@ -750,8 +777,8 @@ static int __init i8k_init_hwmon(void) > if (err >= 0) > i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2; > > - i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "i8k", NULL, > - i8k_groups); > + i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "dell-smm", > + NULL, i8k_groups); dell-smm is not a valid name, see hwmon_device_register_with_groups() for more info (dash not allowed). Because of this, the driver can't be loaded. > if (IS_ERR(i8k_hwmon_dev)) { > err = PTR_ERR(i8k_hwmon_dev); > i8k_hwmon_dev = NULL; > @@ -976,33 +1003,24 @@ static int __init i8k_probe(void) > > static int __init i8k_init(void) > { > - struct proc_dir_entry *proc_i8k; > int err; > > /* Are we running on an supported laptop? */ > if (i8k_probe()) > return -ENODEV; > > - /* Register the proc entry */ > - proc_i8k = proc_create("i8k", 0, NULL, &i8k_fops); > - if (!proc_i8k) > - return -ENOENT; > - > err = i8k_init_hwmon(); > if (err) > - goto exit_remove_proc; > + return err; > > + i8k_init_procfs(); > return 0; > - > - exit_remove_proc: > - remove_proc_entry("i8k", NULL); > - return err; > } > > static void __exit i8k_exit(void) > { > hwmon_device_unregister(i8k_hwmon_dev); > - remove_proc_entry("i8k", NULL); > + i8k_exit_procfs(); > } > > module_init(i8k_init); > _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
