When configured via device tree, the associated iio device needs to be
measuring voltage for the converstion to resistance to be correct.
Return -EINVAL if that is not the case.
Signed-off-by: Chris Lesiak <chris.lesiak@xxxxxxxxx>
---
drivers/hwmon/ntc_thermistor.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index 112e4d4..6880011 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -239,8 +239,10 @@ static struct ntc_thermistor_platform_data *
ntc_thermistor_parse_dt(struct platform_device *pdev)
{
struct iio_channel *chan;
+ enum iio_chan_type type;
struct device_node *np = pdev->dev.of_node;
struct ntc_thermistor_platform_data *pdata;
+ int ret;
if (!np)
return NULL;
@@ -253,6 +255,13 @@ ntc_thermistor_parse_dt(struct platform_device *pdev)
if (IS_ERR(chan))
return ERR_CAST(chan);
+ ret = iio_get_channel_type(chan, &type);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ if (type != IIO_VOLTAGE)
+ return ERR_PTR(-EINVAL);
+
if (of_property_read_u32(np, "pullup-uv", &pdata->pullup_uv))
return ERR_PTR(-ENODEV);
if (of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm))
--
1.9.3
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
