Re: [v4] hwmon: (ibmpowernv) pretty print labels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 08, 2015 at 03:42:07PM +0200, Cédric Le Goater wrote:
> The new OPAL device tree adds a few properties which can be used to add
> extra information on the sensor label.
> 
> In the case of a cpu core sensor, the firmware exposes the physical 
> identifier of the core in the "ibm,pir" property. The driver 
> translates this identifier in a linux cpu number and prints out a 
> range corresponding to the hardware threads of the core (as they
> share the same sensor).
> 
> The numbering gives a hint on the localization of the core in the 
> system (which socket, which chip). 
> 
> Signed-off-by: Cédric Le Goater <clg@xxxxxxxxxx>
> ---
> 
>  Changes since v3:
> 
>  - removed error message in case of an unknown physical cpu number
> 
>  Changes since v2:
> 
>  - fix bogus logical cpu retrieval 
>  - use 'threads_per_core' to print out cpu range
> 
>  Changes since v1:
> 
>  - check cpu validity before printing out the attribute label. 
>    if invalid, use a "phy" prefix to distinguish a linux cpu 
>    number from a physical cpu number. 
> 
>  drivers/hwmon/ibmpowernv.c |   41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> Index: linux.git/drivers/hwmon/ibmpowernv.c
> ===================================================================
> --- linux.git.orig/drivers/hwmon/ibmpowernv.c
> +++ linux.git/drivers/hwmon/ibmpowernv.c
> @@ -30,6 +30,7 @@
>  #include <linux/platform_device.h>
>  #include <asm/opal.h>
>  #include <linux/err.h>
> +#include <asm/cputhreads.h>
>  
>  #define MAX_ATTR_LEN	32
>  #define MAX_LABEL_LEN	64
> @@ -110,12 +111,52 @@ static ssize_t show_label(struct device
>  	return sprintf(buf, "%s\n", sdata->label);
>  }
>  
> +static int __init get_logical_cpu(unsigned int hwcpu)
> +{
> +	int cpu;
> +
> +	for_each_possible_cpu(cpu)
> +		if (get_hard_smp_processor_id(cpu) == hwcpu)

drivers/hwmon/ibmpowernv.c: In function 'get_logical_cpu':
drivers/hwmon/ibmpowernv.c:119:38: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
   if (get_hard_smp_processor_id(cpu) == hwcpu)
                                         ^

Guenter

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors





[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux