IT8620E supports three additional voltage sensors.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/it87.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 2ca183029c8f..37a2827348b6 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -216,7 +216,12 @@ static bool fix_pwm_polarity;
#define IT87_REG_FAN_DIV 0x0b
#define IT87_REG_FAN_16BIT 0x0c
-/* Monitors: 9 voltage (0 to 7, battery), 6 temp (1 to 6), 3 fan (1 to 3) */
+/*
+ * Monitors:
+ * - up to 13 voltage (0 to 7, battery, avcc, 10 to 12)
+ * - up to 6 temp (1 to 6)
+ * - up to 6 fan (1 to 6)
+ */
static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82, 0x4c };
static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86, 0x4e };
@@ -230,7 +235,7 @@ static const u8 IT87_REG_PWM[] = { 0x15, 0x16, 0x17, 0x7f, 0xa7, 0xaf };
static const u8 IT87_REG_PWM_DUTY[] = { 0x63, 0x6b, 0x73, 0x7b, 0xa3, 0xab };
static const u8 IT87_REG_VIN[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26,
- 0x27, 0x28, 0x2f };
+ 0x27, 0x28, 0x2f, 0x2c, 0x2d, 0x2e };
#define IT87_REG_TEMP(nr) (0x29 + (nr))
@@ -464,7 +469,7 @@ struct it87_data {
u16 in_scaled; /* Internal voltage sensors are scaled */
u16 in_internal; /* Bitfield, internal sensors (for labels) */
u16 has_in; /* Bitfield, voltage sensors enabled */
- u8 in[10][3]; /* [nr][0]=in, [1]=min, [2]=max */
+ u8 in[13][3]; /* [nr][0]=in, [1]=min, [2]=max */
u8 has_fan; /* Bitfield, fans enabled */
u16 fan[6][2]; /* Register values, [nr][0]=fan, [1]=min */
u8 has_temp; /* Bitfield, temp sensors enabled */
@@ -840,6 +845,9 @@ static SENSOR_DEVICE_ATTR_2(in7_max, S_IRUGO | S_IWUSR, show_in, set_in,
static SENSOR_DEVICE_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 8, 0);
static SENSOR_DEVICE_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 9, 0);
+static SENSOR_DEVICE_ATTR_2(in10_input, S_IRUGO, show_in, NULL, 10, 0);
+static SENSOR_DEVICE_ATTR_2(in11_input, S_IRUGO, show_in, NULL, 11, 0);
+static SENSOR_DEVICE_ATTR_2(in12_input, S_IRUGO, show_in, NULL, 12, 0);
/* Up to 6 temperatures */
static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
@@ -1738,7 +1746,7 @@ static umode_t it87_in_is_visible(struct kobject *kobj,
int i = index / 5; /* voltage index */
int a = index % 5; /* attribute index */
- if (index >= 40) { /* in8, in9 only have input attributes */
+ if (index >= 40) { /* in8 and higher only have input attributes */
i = index - 40 + 8;
a = 0;
}
@@ -1802,8 +1810,10 @@ static struct attribute *it87_attributes_in[] = {
&sensor_dev_attr_in7_beep.dev_attr.attr, /* 39 */
&sensor_dev_attr_in8_input.dev_attr.attr, /* 40 */
-
&sensor_dev_attr_in9_input.dev_attr.attr, /* 41 */
+ &sensor_dev_attr_in10_input.dev_attr.attr, /* 41 */
+ &sensor_dev_attr_in11_input.dev_attr.attr, /* 41 */
+ &sensor_dev_attr_in12_input.dev_attr.attr, /* 41 */
};
static const struct attribute_group it87_group_in = {
@@ -2708,12 +2718,21 @@ static int it87_probe(struct platform_device *pdev)
if (has_six_temp(data)) {
u8 reg = it87_read_value(data, IT87_REG_TEMP456_ENABLE);
+ /* Check for additional temperature sensors */
if ((reg & 0x03) >= 0x02)
data->has_temp |= (1 << 3);
if (((reg >> 2) & 0x03) >= 0x02)
data->has_temp |= (1 << 4);
if (((reg >> 4) & 0x03) >= 0x02)
data->has_temp |= (1 << 5);
+
+ /* Check for additional voltage sensors */
+ if ((reg & 0x03) == 0x01)
+ data->has_in |= (1 << 10);
+ if (((reg >> 2) & 0x03) == 0x01)
+ data->has_in |= (1 << 11);
+ if (((reg >> 4) & 0x03) == 0x01)
+ data->has_in |= (1 << 12);
}
data->has_beep = !!sio_data->beep_pin;
--
2.1.0
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
