The current OPAL firmware exposes the different sensors of an IBM Power
system using the node names such as :
sensors/amb-temp#1-data
sensors/amb-temp#1-thrs
cooling-fan#1-data
cooling-fan#1-faulted
cooling-fan#1-thrs
cooling-fan#2-data
...
The ibmpowernv driver, when loaded, parses these names to extract the
sensor index and the sensor attribute name. Unfortunately, this scheme
makes it difficult to add sensors with a different layout (specially of
the same type, like temperature) as the sensor index calculated in OPAL
is directly used in the hwmon sysfs interface.
What this patch does is add a independent hwmon index for each sensor.
The increment of the hwmon index (temp, fan, power, etc.) is kept per
sensor type in the sensor_group table. The sensor_data table is used
to store the association of the hwmon and OPAL indexes, as we need to
have the same hwmon index for different attributes of a same sensor.
Signed-off-by: Cédric Le Goater <clg@xxxxxxxxxx>
---
drivers/hwmon/ibmpowernv.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
index 570d2360b698..ffcebc9d8bf5 100644
--- a/drivers/hwmon/ibmpowernv.c
+++ b/drivers/hwmon/ibmpowernv.c
@@ -55,6 +55,7 @@ static struct sensor_group {
const char *compatible;
struct attribute_group group;
u32 attr_count;
+ u32 hwmon_index;
} sensor_groups[] = {
{"fan", "ibm,opal-sensor-cooling-fan"},
{"temp", "ibm,opal-sensor-amb-temp"},
@@ -64,6 +65,8 @@ static struct sensor_group {
struct sensor_data {
u32 id; /* An opaque id of the firmware for each sensor */
+ u32 hwmon_index;
+ u32 opal_index;
enum sensors type;
char name[MAX_ATTR_LEN];
struct device_attribute dev_attr;
@@ -185,6 +188,19 @@ static int get_sensor_type(struct device_node *np)
return MAX_SENSOR_TYPE;
}
+static u32 get_sensor_hwmon_index(struct sensor_data *sdata,
+ struct sensor_data *sdata_table, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ if (sdata_table[i].opal_index == sdata->opal_index &&
+ sdata_table[i].type == sdata->type)
+ return sdata_table[i].hwmon_index;
+
+ return ++sensor_groups[sdata->type].hwmon_index;
+}
+
static int populate_attr_groups(struct platform_device *pdev)
{
struct platform_data *pdata = platform_get_drvdata(pdev);
@@ -274,8 +290,13 @@ static int create_device_attrs(struct platform_device *pdev)
goto exit_put_node;
}
+ sdata[count].opal_index = opal_index;
+ sdata[count].hwmon_index =
+ get_sensor_hwmon_index(&sdata[count], sdata, count);
+
snprintf(sdata[count].name, MAX_ATTR_LEN, "%s%d_%s",
- sensor_groups[type].name, opal_index, attr_name);
+ sensor_groups[type].name, sdata[count].hwmon_index,
+ attr_name);
sysfs_attr_init(&sdata[count].dev_attr.attr);
sdata[count].dev_attr.attr.name = sdata[count].name;
--
1.7.10.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
