[PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Explanation of several properties, which allow PWM fan working as a cooling
device, have been embraced in this commit.

Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Acked-by: Eduardo Valentin <edubezval@xxxxxxxxx>
---
Changes for v2:
- Rename cooling-pwm-values to cooling-levels
- Remove default-pulse-width property and stick to default hwmon policy
Changes for v3:
- Changing commit title from "hwmon: dts: Doc:" to "Documentation: dts"
- Remove unnecessary properties
- Set maximal cooling level to 230 instead of 255
Changes for v4:
- None
Changes for v5:
- Move thermal-zones description to example section
- Extending example section
Changes for v6:
- cooling-{min|max}-state properties added to pwm-fan binding
- Mandatory properties for thermal-zones added
- Indentation fixed
---
 .../devicetree/bindings/hwmon/pwm-fan.txt          | 29 ++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 610757c..c6d5332 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -3,10 +3,35 @@ Bindings for a fan connected to the PWM lines
 Required properties:
 - compatible	: "pwm-fan"
 - pwms		: the PWM that is used to control the PWM fan
+- cooling-levels      : PWM duty cycle values in a range from 0 to 255
+			which correspond to thermal cooling states
 
 Example:
-	pwm-fan {
+	fan0: pwm-fan {
 		compatible = "pwm-fan";
-		status = "okay";
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
 		pwms = <&pwm 0 10000 0>;
+		cooling-levels = <0 102 170 230>;
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			     thermal-sensors = <&tmu 0>;
+			     polling-delay-passive = <0>;
+			     polling-delay = <0>;
+			     trips {
+					cpu_alert1: cpu-alert1 {
+						    temperature = <100000>; /* millicelsius */
+						    hysteresis = <2000>; /* millicelsius */
+						    type = "passive";
+					};
+			     };
+			     cooling-maps {
+					map0 {
+						    trip = <&cpu_alert1>;
+						    cooling-device = <&fan0 0 1>;
+					};
+			     };
+		};
-- 
2.0.0.rc2


_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux