On Wed, Oct 15, 2014 at 01:55:09PM -0500, atull@xxxxxxxxxxxxxxxxxxxxx wrote: > From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx> > > Add support for simple on/off control of each channel. > > To add regulator support, the pmbus part driver needs to add > regulator_desc information and number of regulators to its > pmbus_driver_info struct. > > regulator_desc can be declared using default macro for a > regulator (PMBUS_REGULATOR) that is in pmbus.h > > The regulator_init_data can be initialized from either > platform data or the device tree. > > Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx> > Reviewed-by: Mark Brown <broonie@xxxxxxxxxx> > Cc: Guenter Roeck <linux@xxxxxxxxxxxx> Hi Alan, I am still seeing lots of the following: vout0: Failed to create debugfs directory vout1: Failed to create debugfs directory vout2: Failed to create debugfs directory vout3: Failed to create debugfs directory vout4: Failed to create debugfs directory vout5: Failed to create debugfs directory vout6: Failed to create debugfs directory vout7: Failed to create debugfs directory I thought there was a problem in the regulator core, but after looking into it concluded that the regulator core _should_ prepend the names with the device name when creating the debugfs entries, unless no device name is specified. So something must be missing. We'll need to sort this out before I can accept the code. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
