From: lightning314 <wni@xxxxxxxxxx>
Add dt node to describe the thermal zone for the nct1008.
Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 5c21d21..94a1b5d 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -779,12 +779,14 @@
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
- temperature-sensor@4c {
+ nct1008: temperature-sensor@4c {
compatible = "onnn,nct1008";
reg = <0x4c>;
vcc-supply = <&palmas_ldo6_reg>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+
+ #thermal-sensor-cells = <1>;
};
};
@@ -1283,4 +1285,20 @@
<&tegra_car TEGRA114_CLK_EXTERN1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ thermal-zones {
+ nct1008-local {
+ polling-delay-passive = <2000>; /* milliseconds */
+ polling-delay = <0>; /* milliseconds */
+
+ thermal-sensors = <&nct1008 0>;
+ };
+
+ nct1008-remote {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <0>; /* milliseconds */
+
+ thermal-sensors = <&nct1008 1>;
+ };
+ };
};
--
1.8.1.5
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
