On 08/05/2014 05:02 PM, Axel Lin wrote:
On platforms with sizeof(int) < sizeof(long), writing a temperature
limit larger than MAXINT will result in unpredictable limit values
written to the chip. Avoid auto-conversion from long to int to fix
the problem.
Voltage limits, fan minimum speed, pwm frequency, pwm ramp rate, and
other attributes have the same problem, fixes them as well.
vrm is an u8, so the written value needs to be limited to [0, 255].
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
This driver has yet another problem: zone_low and zone_abs are declared
as u8 but written with TEMP_TO_REG, which returns a signed value.
The datasheet (for SCH111X which is supposedly compatible) suggests
that the temperatures should be signed.
No need to resubmit, I fixed it up. Applied.
Guenter
---
drivers/hwmon/dme1737.c | 29 ++++++++++++++++-------------
1 file changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 4ae3fff..71dd0f2 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -277,7 +277,7 @@ static inline int IN_FROM_REG(int reg, int nominal, int res)
return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2));
}
-static inline int IN_TO_REG(int val, int nominal)
+static inline int IN_TO_REG(long val, int nominal)
{
return clamp_val((val * 192 + nominal / 2) / nominal, 0, 255);
}
@@ -293,7 +293,7 @@ static inline int TEMP_FROM_REG(int reg, int res)
return (reg * 1000) >> (res - 8);
}
-static inline int TEMP_TO_REG(int val)
+static inline int TEMP_TO_REG(long val)
{
return clamp_val((val < 0 ? val - 500 : val + 500) / 1000, -128, 127);
}
@@ -308,7 +308,7 @@ static inline int TEMP_RANGE_FROM_REG(int reg)
return TEMP_RANGE[(reg >> 4) & 0x0f];
}
-static int TEMP_RANGE_TO_REG(int val, int reg)
+static int TEMP_RANGE_TO_REG(long val, int reg)
{
int i;
@@ -331,7 +331,7 @@ static inline int TEMP_HYST_FROM_REG(int reg, int ix)
return (((ix == 1) ? reg : reg >> 4) & 0x0f) * 1000;
}
-static inline int TEMP_HYST_TO_REG(int val, int ix, int reg)
+static inline int TEMP_HYST_TO_REG(long val, int ix, int reg)
{
int hyst = clamp_val((val + 500) / 1000, 0, 15);
@@ -347,7 +347,7 @@ static inline int FAN_FROM_REG(int reg, int tpc)
return (reg == 0 || reg == 0xffff) ? 0 : 90000 * 60 / reg;
}
-static inline int FAN_TO_REG(int val, int tpc)
+static inline int FAN_TO_REG(long val, int tpc)
{
if (tpc) {
return clamp_val(val / tpc, 0, 0xffff);
@@ -379,7 +379,7 @@ static inline int FAN_TYPE_FROM_REG(int reg)
return (edge > 0) ? 1 << (edge - 1) : 0;
}
-static inline int FAN_TYPE_TO_REG(int val, int reg)
+static inline int FAN_TYPE_TO_REG(long val, int reg)
{
int edge = (val == 4) ? 3 : val;
@@ -402,7 +402,7 @@ static int FAN_MAX_FROM_REG(int reg)
return 1000 + i * 500;
}
-static int FAN_MAX_TO_REG(int val)
+static int FAN_MAX_TO_REG(long val)
{
int i;
@@ -460,7 +460,7 @@ static inline int PWM_ACZ_FROM_REG(int reg)
return acz[(reg >> 5) & 0x07];
}
-static inline int PWM_ACZ_TO_REG(int val, int reg)
+static inline int PWM_ACZ_TO_REG(long val, int reg)
{
int acz = (val == 4) ? 2 : val - 1;
@@ -476,7 +476,7 @@ static inline int PWM_FREQ_FROM_REG(int reg)
return PWM_FREQ[reg & 0x0f];
}
-static int PWM_FREQ_TO_REG(int val, int reg)
+static int PWM_FREQ_TO_REG(long val, int reg)
{
int i;
@@ -510,7 +510,7 @@ static inline int PWM_RR_FROM_REG(int reg, int ix)
return (rr & 0x08) ? PWM_RR[rr & 0x07] : 0;
}
-static int PWM_RR_TO_REG(int val, int ix, int reg)
+static int PWM_RR_TO_REG(long val, int ix, int reg)
{
int i;
@@ -528,7 +528,7 @@ static inline int PWM_RR_EN_FROM_REG(int reg, int ix)
return PWM_RR_FROM_REG(reg, ix) ? 1 : 0;
}
-static inline int PWM_RR_EN_TO_REG(int val, int ix, int reg)
+static inline int PWM_RR_EN_TO_REG(long val, int ix, int reg)
{
int en = (ix == 1) ? 0x80 : 0x08;
@@ -1481,13 +1481,16 @@ static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dme1737_data *data = dev_get_drvdata(dev);
- long val;
+ unsigned long val;
int err;
- err = kstrtol(buf, 10, &val);
+ err = kstrtoul(buf, 10, &val);
if (err)
return err;
+ if (val > 255)
+ return -EINVAL;
+
data->vrm = val;
return count;
}
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
